Spoon Sports | Progressive Lowering Springs | Honda Civic Type R | FL5 K20C1 2.0T | 2023+

£620.00 GBP
Tax Included (UK only) Shipping calculated at checkout.

Pickup available at Dream Automotive

Usually ready in 24 hours

In order to understand the potential of the world’s fastest FF sports car, Spoon Sports tested the stock CIVIC Type R on the race track, the winding roads and the streets of Japan. Right away, they noticed the aggressive suspension set up of the stock vehicle with very high roll rigidity potential. However, on the track, the roll initiated with a slight delay which prevented the driver to smoothly trace the intended cornering line at entry. Meanwhile, the ride was a little too harsh for street driving.

Spoon's goal was clear. To develop progressive springs to improve performance driving at all stages, allowing the driver to trace the ideal cornering line, yet deliver comfort on the street.

To improve sports driving performance, Spoon have increased the spring rate by 10% relative to stock. For better suppleness going over road gaps, Spoon have secured more rebound stroke. Installation of the springs will bring the car down by approximately 20mm for lower centre of gravity.

The highly skilled Spoon Sports development team also worked hard to improve ride comfort. By increasing the coil therefore extending the length of the spring, they have lowered the required load to initiate the response of the spring. The response rate was fine tuned by implementing an irregular-pitched spring having a barrel-shaped cross section profile. The lowered load requirement to initiate spring response improved ride comfort for street use, while the progressive spring rate delivers traction for higher speeds and spirited driving.

The SPOON SPORTS Progressive Spring Set enhances the driver’s ability to control and enjoy the true potential of the CIVIC Type R.

TECH SPECS

  • Front Drop of 20mm
  • Rear Drop of 20mm
  • Front Spring Rate 5.5kgf/mm
  • Rear Spring Rate 5.0kgf/mm

    COMPATIBLE VEHICLES

    • Honda Civic Type R | FL5 K20C1 2.0T | 2023+

    FITTING DETAILS

    Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

    AVAILABILITY

    Contact For Availability

    Product information