Our 12 month 12'500 mile service comprises of a full vehicle inspection during which we will

• Replace the engine oil and filter using Genuine Honda 0w20 oil and filter. 

• Visually inspect all suspension, steering, and braking systems along with all underside fuel and brake lines. 

• Inspect and report Tyre condition wear and pressure 

• Inspect and report Brake condition and wear 

• Check and adjust All fluid levels

• Check lights and wipers

• Check and adjust the handbrake 

• Test drive Vehicle 

Optional pollen filter and anti-bacterial treatment available on all services. 

In addition to carrying out all the work of the first service, we’ll also

• Inspect and adjust engine valve clearances 

As in the first service, we will 

• Replace the engine oil and filter using Genuine Honda 0w20 oil and filter. 

• Visually inspect all suspension, steering, and braking systems along with all underside fuel and brake lines. 

• Inspect and report Tyre condition, wear and pressures

• Inspect and report Brake condition and wear 

• Check and adjust All fluid levels (except gearbox)

• Check lights and wipers

• Check and adjust the handbrake 

• Test drive Vehicle 

Your third service is due after your vehicle has covered 37'500 miles or 3 years old.

The third service will again include everything we do in the first service. 

In addition to carrying out the work of the first service, we’ll also

• Replace brake fluid    - optional brake line replacement recommended 

•                                      - optional Motul fluid upgrade 

• Air filter replacement - K&N Replacement panel filter fitted as standard 

•                                      - optional Eventuri filter replacement 

As in the first service, we will 

• Replace the engine oil and filter using Genuine Honda 0w20 oil and filter. 

• Visually inspect all suspension, steering, and braking systems along with all underside fuel and brake lines. 

• Inspect and report Tyre condition wear and pressure 

• Inspect and report Brake condition and wear 

• Check and adjust All fluid levels

• Check lights and wipers

• Check and adjust the handbrake 

• Test drive Vehicle 

Optional pollen filter and anti-bacterial treatment available on all services. 

DESCRIPTION

These high flow fuel injectors are a 45% increase in flow over the OEM fuel injector allowing you to push the limits on horsepower with your Civic Type R, Accord, or other K20C1 powered vehicle without adding the complexity of port injection. Keep your car 100% direct injection only! These injectors can be installed in 30-40 minutes. Pair this with our high flow fuel pump for 600hp with DI only. Not only does this open the door to higher horsepower levels, but it also allows you to do it safely with acceptable air-fuel ratios. There have been some 450hp dyno charts posted while leaning hard on the OEM fuel system with race gas and very lean air-fuel ratios. This fuel system allows you to keep your air-fuel ratios safe....it's not just for glory pulls on the dyno you can actually race your car hard on this system with room to spare.

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

Please call for more info.

AVAILABILITY

Please allow 14 days 

DESCRIPTION

4P Diamond Claw® flywheel surface lock helps to prevent flywheel bolts from backing out of the crankshaft in high rpm applications where vibrations and harmonics often cause welding of the flywheel to the crank. In the event that the flywheel does become loose and start to vibrate against the crank, this surface lock can help to protect the crank and prevent damage.

Diamond Claw® Surface Locks have successfully eliminated fretting (surface welding) in every application they have been used in. With an installed thickness of .008 inch, a Diamond Claw® will not affect driveline alignment. Diamond Claw® locks consist of precisely sized CBN (diamond) particles that are plated onto proprietary fatigue resistant steel. The uniformity of both diamond particle spacing and overall thickness insured complete contact across the entire Diamond Claw® surface. Diamond with an exceptional hardness of 10,000 Vickers are held within a plating matrix of 950 Vickers. This combination of extreme hardness and toughness allow Diamond Claws® to penetrate surfaces hardened to Hrc 65.

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015+
• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

Please call for more info.

AVAILABILITY

 DESCRIPTION

Whether you are pushing an additional 100hp or 500hp over stock with your K20C1, optimum cylinder head to block sealing is critical. 4P head studs are premium grade 8740 alloy and are precisely manufactured to the highest quality standards. If you plan on turning up the boost and pushing the limits, don't forget this critical part of your build.

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

Please call for more info.

AVAILABILITY

In stock

DESCRIPTION

These high flow fuel injectors are a 25% increase in flow over the OEM fuel injector allowing you to push the limits on horsepower with your Civic Type R, Accord, or other K20C1 powered vehicle without adding the complexity of port injection. Keep your car 100% direct injection only! These injectors can be installed in 30-40 minutes. Pair this with our high flow fuel pump for 500hp with DI only. Jump to 1650cc injector for even more horsepower capability. Not only does this open the door to higher horsepower levels, but it also allows you to do it safely with acceptable air-fuel ratios.

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015+
• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

Please call for more info.

AVAILABILITY

Please allow 14 days 

Our 62'500 mile service comprises of a full vehicle inspection during which we will

• Replace the engine oil and filter using Genuine Honda 0w20 oil and filter. 

• Visually inspect all suspension, steering, and braking systems along with all underside fuel and brake lines. 

• Inspect and report Tyre condition wear and pressure 

• Inspect and report Brake condition and wear 

• Check and adjust All fluid levels

• Check lights and wipers

• Check and adjust the handbrake 

• Test drive Vehicle 

Optional pollen filter and anti-bacterial treatment available on all services. 

DESCRIPTION

Teaming up with 7mod seeing us able to offer you a plug and play hybrid turbo capable of up to 460-500hp. 

Based on the standard unit, the core turbo start off being fully shot blasted

The next process in re-engineering will be to polish the inlet and fit with a 50mm compressor wheel, The turbine side will be upgraded to a 9 blade 46.8mm turbine wheel. 

The turbo with benefit from upgraded bearings and capable of running 2.5 bar boost.

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:

• Fitting Cost - £
• Fitting Time - Hours
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - No additional recommendations.

AVAILABILITY

Contact sales@dream-automotive.com for further information

7mod stage 1/2 ECU optimisation mapping

Gains of approx. +40hp and +60lbft (Stage 1)

7mod stage 1/2 ECU optimisation mapping

Gains of approx. +40hp and +60lbft (Stage 1)

DESCRIPTION

Form AND Function from a Sticker?! Poppycock!

What build is complete without a windshield banner? Not only do windshield banners add a sleek appearance by virtue of the illusion of a lower roofline, but a windshield banner also helps to block out sunlight and improve visibility in very bright conditions. These banners are screen-printed on a matte white vinyl. The banners are designed to be weather resistant and UV-light resistant. We've used a very unique left-justified logo location to give your car a less common but more modern appearance.

TECH SPECS

• Matte vinyl with black printed logo.
• Weather and UV-light resistant.
• Overall measurements are 54" wide by 10" tall.

COMPATIBLE VEHICLES

• Any vehicle with a windshield width less than 54" for the top 10" of the windshield.

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Here are the important things you need to know:

• Fitting Cost - 
• Fitting Time -
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - No additional recommendations.

Use a felt-tipped squeegee to protect the matte surface and vinyl application fluid to help avoid any unwanted bubbles. The banner can be applied without these products, but they will improve the quality of the installation. Installation is best performed with 2 people and working from one side of the windshield to the other. Before removing the backer from the banner, test fit the banner on the windshield and mark where you want it located using painter's tape. Remember to measure from the top of the A-pillar on each side of the windshield to make sure the banner will be installed level. If removing the backer exposes paper, the backer has not been fully removed. If this occurs, use a sharp razor to get between the vinyl and the backer. After this, the banner will peel off quite easily.

AVAILABILITY

Lead Time Varies

DESCRIPTION

For those who have always dreamed of having a cup of lean hanging from their rear-view mirror, whilst emitting a lovely green tea fragrance, the wait is finally over. By popular demand, we are making our Double Cup air fresheners available in 10-packs. Will the beautiful, aromatic green tea scent last forever? Nope. Will your mom be offended? Maybe, but only if she's up-to-date on pop culture references. Does it look like lean/sizzurp/drank/Texas Tea/Dirty Sprite? We have no idea what you're talking about, officer.

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton

AVAILABILITY

Stock Item

DESCRIPTION

The ESCO-T6 is the rebirth of ACUiTY's popular ESCO shape in 6061-T6 aluminium. The ESCO design is quickly becoming the preferred drivers' knob due to its carefully-crafted profile. With a 40mm barrel-shaped upper portion, gently domed top, and a tapered bottom, the ESCO-T6 fits beautifully in most drivers' hands. While spherical knobs have become popular, the truth is they allow a lot of grip variation when changing gears. By forcing a more consistent hand position through its unique shape, the ESCO-T6 helps to train muscle memory, making shifts more consistent.

The ESCO-T6 weighs in at approximately 185 grams. The mid-weight is meant to provide enough mass to provide a good shift feel without masking feedback from the gearbox. To complement the ergonomic shape, each knob is anodized in a durable satin purple anodized finish and laser engraved with the 6-Speed Honda/Acura gear pattern. The finished appearance is simple and classic. For the best shifting experience, pair your ESCO knob with ACUiTY's other shifting upgrades for your car.

TECH SPECS

• Classic ESCO shape
• Full 6061-T6 aluminium construction
• 185 grams
• 40mm diameter, 70mm height
• Durable satin anodised finish
• Laser-etched 6-speed Honda/Acura gear pattern
• Engraved i logo near base

COMPATIBLE VEHICLES

• All M10x1.5 threaded shift levers (primarily intended for use with Honda 6 speed gearboxes).

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. 

Important Note About Shift Boot Fitment:

On many Hondas and Acuras made after 2010, the shift boot clips to the underside of the shift knob. Older vehicles had a shift boot that just sat near the underside of the knob but did not mate to it. If your shift boot clips to the underside of your shift knob, you should check to see if it clips to a nut or to the knob itself. If the boot clips to a nut, your boot and nut should work with your new Esco knob as well. If the boot clips to the actual OEM shift knob, however, you will need additional parts to prevent the boot from sagging after installation. We currently provide 3 shift boot collars that can correct this issue. The part #'s are 1924-K1 (satin black anodized finish), 1924-K2 (turned stainless steel finish), 1924-K3 (burnt titanium finish).

Similarly, if you have an older vehicle that doesn't have a shift boot that clips to the knob, you can also use the same shift boot collars (1924-K1, 1924-K2, and 1924-K3) to clip the boot to the knob for a more modern, clean, finished appearance.

AVAILABILITY

Stock Item

DESCRIPTION

ROBUST ENOUGH FOR THE TRACK, REFINED ENOUGH FOR THE STREET:

Easily the most capable shifter available for the 10th Gen Civic, the beauty of the ACUITY Fully Adjustable Performance Shifter is due in part to the careful attention to detail and rigorous testing that went into its nearly 2-year design process. Gear throw and gate spacing are independently adjustable and allow for mild to rather extreme reductions compared to stock. Using these adjustments, it's quite easy to tune the H-pattern spacing of your shifter to your exact liking. To permit the most personalized shift, the knob is both height and position adjustable, with laser markings indicating safe adjustment ranges. The shifter's frame is built from a careful combination of aluminium and stainless steel, to improve the frame's stiffness while being mindful of weight. A large-diameter, aluminium pivot ball in a wear-compensating, spherical race provides smooth shifting with minimal friction and great long-term resistance to play. Centring is quick, decisive and consistent, compliments of a thick, over-wound centring spring and re-engineered spring perches. The spherical joint in the rocker has been heavily upgraded over the OEM design to allow for wear-compensation, to avoid the play that typically develops in the OEM shifter. To aid in installation, this shifter is equipped with unique base bushings that feature an O-ring fastening design that allows them to stay affixed to the shifter.

TECH SPECS

• Throw can be adjusted to the user's preference and reduced substantially if desired.

• Gate spacing is also adjustable and can be adjusted to the user's preference.

• Knob height adjustable +24mm/-10mm compared to stock
• Aluminium and Stainless Steel frame for efficient compliance reduction
• Honed bronze bushings and wear-compensating spherical joints for longevity and minimal play
• Stiffer, over-wound spring improves centring action
• Includes aluminium base bushings

COMPATIBLE VEHICLES

• 2017+ Honda Civic Sport*
• 2017+ Honda Civic Si (FC1/FC3)*
• 2017+ Honda Civic Type R (FK8)*

*Note: Fits both Left-Hand-Drive and Right-Hand-Drive vehicles.

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:

• Fitting Time - 2 Hours
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - No additional recommendations.
• Installation Guide

AVAILABILITY

Stock Item

DESCRIPTION

The Right Way to Remove Interior Panels:

Often when installing things like shifters, gauges, speakers, or other interior modifications, it becomes necessary to remove interior panels. While screwdrivers can often be made to work, using them risks scratching the fragile plastic panels. This toolkit is designed to help remove interior panels and clips while reducing the risk of scratches or damages to the panels. These are a great add-on when installing an ACUITY shifter or shifter base bushings.

WHAT'S IN THE BOX

• 4 x unique pry tools

COMPATIBLE VEHICLES

• This product is designed to be a universal toolkit to aid in the removal of interior panels and their associated clips.

AVAILABILITY

Stock Item

DESCRIPTION

Acuity Instruments Performance Shifter Base Bushings

The OEM base bushings on most Hondas and Acura's are made from highly compliant rubber. Thanks to leverage, the small amount of compliance the rubber base bushings add equates to a very noticeable "spongy" feeling in the shift knob during shifts. This bushing kit replaces the OEM rubber bushings with rigid 6061-T651 aluminum making for a much more decisive shift, even with a stock shifter. As an added touch, the bushings are coated in a purple Type 2 anodized finished, laser-etched with torque and driver specs, and paired with class 10.9 screws for strength.

This mod pairs well with our Shifter Cable Bushing Upgrade (use SKU 1881 for the GE8, 9th Gen Accord and FK2 or SKU 1917 for the 7th Gen Accord and EP3).

TECH SPECS

• Reduces compliance by replacing the OEM rubber bushings with solid aluminum
• Class 10.9+ hardware
• Purple anodized finish
• Laser-etched driver and torque specs

COMPATIBLE VEHICLES

• 2003-2007 HONDA Accord (7th Gen, all MT)
• 2008-2012 HONDA Accord (8th Gen, all MT)
• 2009-2014 HONDA Fit (GE8) 2002-2005
• HONDA Civic Si/R (EP3) 2005-2007
• HONDA Civic Type R (FK2)

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

In stock

DESCRIPTION

A Simple Mod You'll Enjoy on Every Drive:

This spring was designed to improve the centring action of your 10th Gen's stock shifter. If you've ever found the centring action of your shifter to leave you wanting a sportier feel, the solution is finally here. With a notably increased preload and nearly identical rate, the ACUITY Performance Shifter Centering Spring increases the centring load in neutral without significantly increasing the force required to locate the far gates (e.g. 1/2 and R). The end result is a sportier shifting feel without an increase in driver fatigue or a reduction in drivability. This spring is designed to provide a 100% increase in spring force on the Sport model and a 20% increase in spring force on the Si and CTR. This translates to about a 50% increase in centring force at the knob in the Sport model and about a 10% increase at the knob in the Si and CTR. In addition to the Performance Shifter Centering Spring, each kit is supplied with a small packet of premium silicone grease to re-lubricate the shifter with after removing the OEM spring.

COMPATIBLE VEHICLES

• 2017+ Honda Civic (All 6MT)
• 2017+ Honda Civic Si (FC1/FC3)
• 2017+ Honda Civic Type R (FK8)*

*Note: Does not fit 2015-2016 Honda Civic Type R (FK2)

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:

• Fitting Cost - £60
• Fitting Time - 1 Hour
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - Pairing the Performance Shifter Centering Spring with the 1914 Shifter Base Bushings. The combination makes for a surprisingly noticeable improvement in shifting at a very reasonable price.

AVAILABILITY

Stock Item

DESCRIPTION

The finishing touch that looks good with any shift knob.

Introducing our classic and very functional shift boot collar design. Gone are the days of sagging shift boots, broken plastic shift boot collars, and shift boot collars that don't match the diameter or style of your shift knob. ACUITY designed this Shift Boot Collar Upgrade to allow the use of virtually any M10x1.5 shift knob in your Honda without sacrificing fit and finish between the shift boot and shift knob. This kit includes 2 binding nuts, one meant for flat-bottomed knobs, and the other meant for boss-bottomed knobs (like modern Civic Type R and Honda Factory Performance designs). The boot collar is reversible and can be flipped to match your knob's base diameter, whether it be a traditional narrow-bottomed knob or the newer style wide-bottomed knobs. An integral retaining feature lets you easily pop the boot collar on and off many times without problems, so you no longer have to worry about breaking the OEM plastic boot ring when removing your shift knob. The supplied binding nuts are turned and milled from stainless steel and have flats for a 12mm open-ended wrench.

WHAT'S IN THE BOX

• 1 x Shift Boot Collar
• 1 x Flat-Bottomed Knob Binding Nut
• 1 x Boss-Bottomed Knob Binding Nut
• 4 x Small Cable Ties

COMPATIBLE VEHICLES

• 1999-2009 Honda S2000 (All MT)
• 2002-2005 ACURA RSX-S
• 2002-2005 ACURA RSX (All MT)
• 2002-2006 Honda Integra R
• 2006-2011 Honda Civic Si
• 2006-2011 Honda Civic (All MT)
• 2009-2014 Honda Fit (All MT)
• 2015+ Honda Fit (All MT)
• 2012-2015 Honda Civic Si
• 2012-2015 Honda Civic (All MT)
• 2014+ Honda Fit (All MT)
• 2015-2016 Honda Civic Type R (FK2)
• 2016+ Honda Civic (All MT)
• 2017+ Honda Civic Si (FC1/FC3)
• 2017+ Honda Civic Type R (FK8)
• 2018+ Honda Accord (All MT)

Also fits most Honda M10x1.5 shifters. The fitment list above is simply vehicles where we have confirmed fitment.

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Here are the important things you need to know:

• Fitting Time - 0.5 Hours
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - No additional recommendations.
• Installation Guides

On some shift boots, the supplied zip ties may not reach around the whole boot. Avoid using a larger cable tie as it will not fit into the groove on the boot collar as well. Instead, use 2 of the supplied cable ties attached together to reach around the whole shift boot. The supplied cable ties are quite narrow and are selected to fit into the boot collar. If you need more cable ties, similar cable ties can be purchased (normally in black though) from most hardware stores near you.

AVAILABILITY

Stock Item

DESCRIPTION

The finishing touch that looks good with any shift knob.

ACUITY are very pleased to introduce their V2 Burnt Titanium Shift Boot Collars, now featuring an anodized finish for an updated appearance and improved color consistency from part to part. These feature all of the benefits of their other 1924 shift boot collars, plus billet 6Al-4V Titanium with a beautiful blue-purple-gold anodized finish.  Gone are the days of sagging shift boots, broken plastic shift boot collars, and shift boot collars that don't match the diameter or style of your shift knob. ACUITY designed this Shift Boot Collar Upgrade to allow the use of virtually any M10x1.5 shift knob in your Honda without sacrificing fit and finish between the shift boot and shift knob. This kit includes 2 binding nuts, one meant for flat-bottomed knobs, and the other meant for boss-bottomed knobs (like modern Civic Type R and Honda Factory Performance designs). The boot collar is reversible and can be flipped to match your knob's base diameter, whether it be a traditional narrow-bottomed knob (with a 22mm lower diameter) or the newer style wide-bottomed knobs (with a 28mm lower diameter). An integral retaining feature lets you easily pop the boot collar on and off many times without problems, so you no longer have to worry about breaking the OEM plastic boot ring when removing your shift knob. The supplied binding nuts are turned and milled from stainless steel and have flats for a 12mm open-ended wrench. 

WHAT'S IN THE BOX

• 1 x Shift Boot Collar
• 1 x Flat-Bottomed Knob Binding Nut
• 1 x Boss-Bottomed Knob Binding Nut
• 4 x Small Cable Ties

COMPATIBLE VEHICLES

Vehicles with ACUiTY confirmed fitment:

• 1999-2009 Honda S2000 (All MT)
• 2002-2005 Honda Civic (7th Gen, all trims, MT only)
• 2002-2005 Acura RSX-S
• 2002-2005 Acura RSX (All MT)
• 2002-2006 Honda Integra R
• 2002-2006 Honda CR-V (2nd Gen, MT only)
• 2003-2007 Honda Accord (7th Gen, MT only)
• 2003-2011 Honda Element (MT only)
• 2004-2008 Acura TSX (1st Gen, MT only)
• 2006-2011 Honda Civic Si
• 2006-2011 Honda Civic (All MT)
• 2008-2012 Honda Accord (8th Gen, K-Series only, MT only)
• 2009-2014 Acura TSX (2nd Gen, MT only)
• 2009-2014 Honda Fit (All MT)
• 2011-2016 Honda CRZ (MT only)
• 2015+ Honda Fit (All MT)
• 2012-2015 Honda Civic Si
• 2012-2015 Honda Civic (All MT)
• 2014+ Honda Fit (All MT)
• 2015-2016 Honda Civic Type R (FK2)
• 2016+ Honda Civic (All MT)
• 2017+ Honda Civic Si (FC1/FC3)
• 2017+ Honda Civic Type R (FK8)
• 2018+ Honda Accord (All MT)

Also fits most Honda M10x1.5 shifters. The fitment list above is simply vehicles where we have confirmed fitment.

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Here are the important things you need to know:

• Fitting Time - 0.5 Hours
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - No additional recommendations.
• Installation Guides

On some shift boots, the supplied zip ties may not reach around the whole boot. Avoid using a larger cable tie as it will not fit into the groove on the boot collar as well. Instead, use 2 of the supplied cable ties attached together to reach around the whole shift boot. The supplied cable ties are quite narrow and are selected to fit into the boot collar. If you need more cable ties, similar cable ties can be purchased (normally in black though) from most hardware stores near you.

AVAILABILITY

15 days

DESCRIPTION

The OEM base bushings on most Hondas and Acuras are made from highly compliant rubber. Thanks to leverage, the small amount of compliance the rubber adds equates to a very noticeable "spongy" feeling in the shift knob during shifts. This bushing kit replaces the OEM rubber bushings with rigid 6061-T651 aluminium making for a much more decisive shift, even with a stock shifter. As an added touch, the bushings are coated in a purple Type 2 anodized finished, laser etched and paired with class 10.9 flat-head mounting bolts.

TECH SPECS

• Reduces compliance by replacing the OEM rubber bushings with solid aluminium.
• Purple anodized finish.
• Laser etched acuity logos.

WHAT'S IN THE BOX

• 4 x upper bushings
• 4 x lower bushings
• 4 x class 12.9 M6 mounting bolts

COMPATIBLE VEHICLES

• 2017+ Honda Civic Sport (All 6MT)
• 2017+ Honda Civic Si (FC1/FC3)
• 2017+ Honda Civic Type R (FK8)*

*Note: Does not fit 2015-2016 Honda Civic Type R (FK2) CLICK HERE FOR FK2

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton. Here are the important things you need to know:

• Fitting Cost - £60
• Fitting Time - 1 Hour
• Installation Guide

AVAILABILITY

Stock Item

DESCRIPTION

The OEM base bushings on most Hondas and Acuras are made from highly compliant rubber. Thanks to leverage, the small amount of compliance the rubber adds equates to a very noticeable "spongy" feeling in the shift knob during shifts. This bushing kit replaces the OEM rubber bushings with rigid 6061-T651 aluminium making for a much more decisive shift, even with a stock shifter. As an added touch, the bushings are coated in a purple Type 2 anodized finished, laser etched and paired with class 10.9 flat-head mounting bolts.

TECH SPECS

• Reduces compliance by replacing the OEM rubber bushings with solid aluminium.
• Purple anodized finish.
• Laser etched acuity logos.

WHAT'S IN THE BOX

• 4 x upper bushings
• 4 x lower bushings
• 4 x class 12.9 M8 mounting bolts

COMPATIBLE VEHICLES

• 2001-2005 HONDA Civic (Non-Si MT)
• 2002-2006 ACURA RSX (All MT)
• 2004-2008 ACURA TSX (All MT)
• 2012-2015 HONDA Civic (All MT)
• 2015-2016 Honda Civic Type R (FK2)*

*Note: Does not fit 2017+ Honda Civic Type R (FK8)

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:

• Fitting Cost - £60
• Fitting Time - 1 Hour
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - No additional recommendations.

AVAILABILITY

Stock Item

DESCRIPTION

Your OEM Bushings Suck:

Bad news: it's true. Honda intentionally makes their rubber shifter cable bushings very compliant in an effort to give the car a more tame feel. For many drivers, that's ideal. Unfortunately, this disconnects the driver from feeling the transmission during shifts, often leading to missed shifts or slow shifting in racing conditions. A less compliant plastic or metal bushing is the ideal solution, but without a spherical bearing, the bushing will cause the cables to bind and fatigue. That's why ACUITY has designed this kit with a custom acetal and aluminium spherical bushing. Also unlike most bushings on the market, ACUITY's design incorporates elastomer rings to provide the best fit possible with your cables. Experience a solid, smooth shift that will make you fall in love with your car again.

Understanding the Science of that Perfect Shift Feel:

Years of experience have taught the engineers at ACUITY that there are many elements to a refined, responsive shift. Compliance from flimsy components in the shift linkage leaves the driver feeling detached from the transmission. ACUITY combats this by replacing the OEM rubber bushings with much stiffer Acetal and 6061-T6 Aluminum. A large-diameter, custom spherical bearing minimizes long-term wear and tear while eliminating the binding that is caused by most aftermarket solid shifter cable bushings. Loose fitting components also contribute to a poor shifting feel. That's why ACUITY uses integral o-rings on the outside of each bushing to provide a perfect fit with your OEM cables. Tested on street cars, track cars, and ACUITY's unreasonably violent shifter testing machine, these bushings are designed to be robust and proven to last. Each bushing kit is laser etched with a unique serial number and includes stainless steel hardware to help prevent long-term corrosion, keeping your bushings looking great even longer. And if all of that isn't impressive enough, the bushings are over 20% lighter than their OEM counterparts, weighing in at only 48 grams (with hardware).

COMPATIBLE VEHICLES

• 2015-2016 Honda Civic Type R (FK2)
• 2017+ Honda Civic Sport (All 6MT)
• 2017+ Honda Civic Si (FC1/FC3)
• 2017+ Honda Civic Type R (FK8)

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:

• Fitting Cost - £48
• Fitting Time - 0.8 Hours
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - No additional recommendations.
• Installation Guides

AVAILABILITY

Stock Item

DESCRIPTION

Narrower Gates, Less Play, Stiffer Feel:

Refining your Civic's shifting system is a great way to add a sporty feel that will put a smile on your face every time you go for a drive. The ACUITY Shifter Rocker Upgrade for the 10th Gen Honda Civic can be appreciated as much during street driving as at the track. Altered geometry reduces the mechanical advantage of the rocker to provide narrower, stiffer gates. Much like how a short throw adapter reduces the distance in the forward and reverse direction while changing gears, this Shifter Rocker Upgrade reduces the distance in the left and right direction while changing gears (such as 2 to 3, 4 to 5, etc). The OEM plastic has been replaced with billet 6061-T6 aluminium construction. This makes for a much stiffer part, meaning less flex when shifting forcefully and better feedback from the transmission during shifts. Additionally, ACUITY's unique joint designs at the main pivot and spherical joint incorporate low-friction, self-lubricating bushings that are designed to reduce friction in the shifter while naturally eliminating any gaps between parts in the joint. This allows the joint to wear-compensate over time, meaning the rocker will age gracefully and provide many years of use, abuse, and happy shifting. Class 10.9 steel hardware and an aluminium bushing replace the factory snap-in feature, further reducing free play. 

On the Civic Si and Sport models, this Shifter Rocker Upgrade will reduce gate spacing by approximately 11% and will stiffen the lateral action of the shifter. Additionally, stiffness in the left/right motion will increase, feeling more rigid, and free play in the left/right direction will be reduced.

On the Civic Type R, this Shifter Rocker Upgrade will reduce gate spacing by approximately 5% and will stiffen the lateral action of the shifter. Additionally, stiffness in the left/right motion will increase, feeling more rigid, and free play in the left/right direction will be reduced.

Below is an illustration of how the gate spacing changes after installation. Note that the spacing change is exaggerated in the image to make the effect clear.

WHAT'S IN THE BOX

• A packet of silicone grease is included with each kit to help lubricate the o-rings before installation into the shifter. It is not necessary to grease the spherical joint or hinge.

COMPATIBLE VEHICLES

• 2017+ Honda Civic (All 6MT)
• 2017+ Honda Civic Si (FC1/FC3)
• 2017+ Honda Civic Type R (FK8)*

*Note: Does not fit 2015-2016 Honda Civic Type R (FK2)

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:

• Fitting Cost - £60
• Fitting Time - 1 Hour
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - This pairs very well with Acuity's Shifter Base Bushings (1914), Shifter Centering Spring Upgrade (1918), and Short Throw Adapter (1923).
• Installation Guides

AVAILABILITY

Stock Item