Eibach Pro-Spacer Wheel Spacers | Honda Civic Type R | FK2/FK8 2.0T K20C1 | 2015+
Regular price
£153.50 GBP
PRO-SPACER | Wheel Spacers | System 4
Made from high-tensile-strength aluminium alloy
Exact fitment by using minimal production tolerances, resulting in exceptional wheel balance
All applications tested in rigid durability and fatigue tests
High-grade corrosion protection through a special coating process (salt spray test according to DIN 50021)
Significant weight advantage compared to wheel-spacers made from steel
Eibach Pro-Spacer is the ideal combination for use with the Eibach Pro-Kit as well the Sportline, if the original or aftermarket wheels are missing that last optical "kick".
With the Eibach Pro-Spacer installed, the car looks wider and better, as the wheel fills the arch. That's how the cars look gets its final touch.
By increasing the track width, not only the appearance is improved, but you also achieve an optimized driving behaviour combined with higher stability, as the roll of the chassis is influenced in a positive manner.
Optimize the "sportive touch" to the last detail: wheels, tires, Eibach Suspension Components and Pro-Spacer!
You'll achieve optimum looks and enhanced handling by moving your wheels flush with the outer edges of the wheel wells. Simply measure the wheel-well/tyre gap, as shown here, and order the corresponding Pro-Spacers to put your wheels and tyres out where they belong.
sold as pairs
15/18/20mm spacers will all require a small amount of grinding to the back of your OEM wheels in order to get the correct fitment. This cannot be seen once the wheel has been refitted.
25mm Will bolt straight on
Eibach 'Dream Automotive Spec' Pro-Kit Performance Springs | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Regular price
£219.95 GBP
Launched in October 2016 is our very own Dream Automotive Exclusive Performance Spring kit for the FK2 Type R. Designed and made by suspension legends Eibach to our exact specifications, this uprated 4 spring kit will offer a performance focused ride height lowering the car by 20mm. The lower centre of gravity will offer improved handling and responsiveness whist also enhancing the naturally aggressive stance of your FK2. Made from the same quality Hi-Tensile steel as used by Eibach for all their springs from aftermarket through to F1, the springs go through a number of stages after coiling – pre-stress, shot peening and then electrostatically powder coated for longevity, so you can be confident you are investing in a quality solution for your Type R. Finished in a Royal Glossy Silver and stamped with the notable names of both Dream and Eibach this is truly a ‘dream team' production.
Lead time: In stock
Swave & Summit Aluminium Front Upper Strut Bar | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Regular price
£210.00 GBP
Alloy front strut brace for 2015 Civic Type R FK2.
Lead time: In Stock
Spoon Sports Rigid Collar Kit | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Regular price
£195.00 GBP
DESCRIPTION
Rigid Collars are simple in their shape but clever in their design.
Rigid Collars are made from a secret blend of space materials which ensures they mount perfectly flat between the chassis and subframe taking up any imperfection in the mounting surfaces.
Rigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer.
This is achieved by the collar material, the tapered design and extremely high manufacturing tolerances.
AVAILABILITY
In stock
Genuine Honda 'Dream Automotive Spec' Negative Camber Front Lower Ball Joints | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Regular price
£189.99 GBP
Front lower ball joints to suit Honda Civic Type R FK2
Genuine Honda Service Part gives an additional 0.5 degree of negative camber compared to OEM part
Genuine Honda Service Part Dream Automotive Spec gives an additional 1.5 degrees of negative camber compared to OEM part
Sold as a pair
Lead time: 2 days
Swave & Summit Rear Lower Short Tie-Bar | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Regular price
£142.80 GBP
Rear lower short chassis brace for 2015 civic type R FK2,
Lead time: in stock
Swave & Summit Front Lower Subframe V-Support Set | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Regular price
£270.00 GBP
Front forged solid aluminium lower subframe braces for 2015 civic type R FK2, replaces existing braces, sold as a pair
Lead time: in stock
Hardrace 17mm Rear Anti-Roll Add-On SwayBar | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Regular price
£223.95 GBP
Hardrace 17mm rear anti-roll sway bar
Anti-roll sway bar affects the handling and the cars oversteer and understeer. It ties the lower suspension links together across the front or back, will keep your car flat in turns instead of leaning over to one side. Hardrace sway bars provide better control especially at high speeds cornering
. Designed for direct bolt-on . Correction of under or oversteer . Improve more grip and better handling . Increased stability while during high-speed cornering
Lead time: 2 weeks
Cusco Rear Anti-Roll Bar | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Regular price
£254.77 GBP
DESCRIPTION
Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and use the factory mounting locations. A Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. The larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.
The FK2 Civic Type R from the factory isn't fitted with a rear sway bar, this product is designed to bolt to current mounting points and comes with the required hardware.
TECH SPECS
The bar is 16mm in diameter.
COMPATIBLE VEHICLES
Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:
Fitting Cost -
Fitting Time -
Required Additional Items/Services - No additional items or services needed.
Dream Automotive Recommends - No additional recommendations.
AVAILABILITY
3-5 Days
Cusco Front Anti-Roll Bar | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Regular price
£264.96 GBP
DESCRIPTION
Cusco anti-sway bars replace the factory anti-sway bars (if equipped) and use the factory mounting locations. A Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. The larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.
TECH SPECS
The bar is 25mm vs the standard which is 23mm, this offers an increase in rigidity of approx. 50%
WHAT'S IN THE BOX
The item is designed to replace the standard item and includes all necessary hardware.
COMPATIBLE VEHICLES
Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:
Fitting Cost -
Fitting Time -
Required Additional Items/Services - No additional items or services needed.
Dream Automotive Recommends - No additional recommendations.
AVAILABILITY
3-5 Days
Dream Automotive Bolt-In Roll Cage | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Regular price
£895.00 GBP
Built to our own exact requirements, our bolt in half cage will not only keep you safe in the event of an accident but looks good at the same time.
Produced from Coldrawn seemless mild steel or T45 alloy/steel 45mm tubing featuring a double x brace with gusseted centers, along with built in harness bar, our cage allows full slide on both front seats to accommodate drivers of all sizes.
Piece design using billet 2 bolt joiners attaching the 38mm infill rear section to the main 45mm front hoop.
You will be required to drill a few holes in order to mount the cage through the floor and will bolt to the top of the rear shock mounts.
Lead time: 4/6 weeks
Swave & Summit Mid Lower Long Tie-Bar | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Regular price
£150.00 GBP
Rear Lower Long 2-Point Body Chassis Tie Bar for 2015 civic type R FK2,
Lead time: in stock
Swave & Summit Rear Lower Suspension Brace | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Regular price
£342.00 GBP
Rear lower suspension brace for 2015 civic type R FK2,
Lead time: in stock
Swave & Summit Front Lower Subframe 4-Point Support Bar | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Regular price
£240.00 GBP
Front Lower 4-Point Subframe and Body Chassis Brace.
Lead time: In Stock
Cusco Safety 21 Steel Roll Cage | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Regular price
£443.95 GBP
DESCRIPTION
SAFETY21 Roll Cage. The steel Safety 21 rollcages are made durable for those who regularly track their cars. These steel rollcages comply with sanctioning race bodies that abide by FIA regulations*. The Safety21 rollcages are available from a 4 point rollbar type all the way to 15 point configurations, strengthening individual areas of the chassis to keep the cabin intact during a roll over. A variety of roll bars are available based on bar layout and number of passengers. Overall lightness was pursued from the get go on the complete design of the roll bar/cage, thus details such as mounting points, bar joints and other details were thoroughly examined, researched and tested prior to making its final version available for sale. Suitable for all 2015+ Honda Civic Type R.
TECH SPECS
- Safety 21 bars are made from extra tough and strong cold drawn seamless carbon steel.
- 40mm pipe diameter. - Pipe thickness: 2.0mm - Some Safety 21 complies to FIA regulations depending on the sanctioning body. - Mounting plate size / thickness: over 60cm2 / 2.6mm - Reinforcement plate size / thickness: over 120cm2 / 3.2mm - Available in 4-Point, 5-Point, 6-Point, 7-Point, 8-Point, 9-Point, 11-Point and 15-Point configurations.
COMPATIBLE VEHICLES
Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:
Fitting Time - (Hours)
Required Additional Items/Services - No additional items or services needed.
Dream Automotive Recommends - No additional recommendations.
AVAILABILITY
6-8 Weeks
Cusco Front Power Brace | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Regular price
£132.48 GBP
DESCRIPTION
These Power Braces are designed to stiffen up your chassis and help reduce vehicle body flex. When driving the car hard into corners, you will want to reduce the chassis flex and increase the rigidity of your car.
Developed by chassis engineers based off‑ the data logged directly from CUSCO motorsports research. The Powerbrace strengthens chassis and minimizes body flex especially at cornering loads, enabling optimal suspension movement at the intended geometrically aligned state. Having the same effect as stitch welding a chassis, the Powerbrace series is 100% bolt-on and completely effective on all vehicle chassis no matter whether stock or highly modified.
These bars are lightweight and engineered inside & out by using the state of the art chassis stress test simulation software by leading motorsports professionals.
COMPATIBLE VEHICLES
Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:
Fitting Cost -
Fitting Time -
Required Additional Items/Services - No additional items or services needed.
Dream Automotive Recommends - No additional recommendations.
AVAILABILITY
3-5 Days
Hardrace Front Lower Camber Adjuster 2Pcs set | Honda Civic Type R | FK8 2.0T K20C1 | 2017+
Regular price
£279.95 GBP
DESCRIPTION
HARDRACE front lower ball joint replace your old ball joint to give you a more accurate feel with the steering
. OEM direct replacement . Regular greasing not required . No noise or squeaks
COMPATIBLE VEHICLES
Honda Civic Type R | FK8 2.0T K20C1 | 2017+
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.
AVAILABILITY
2-7 Workings Days
Hardrace Front Lower Camber Adjuster 2Pcs set | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Regular price
£309.95 GBP
DESCRIPTION
HARDRACE front lower ball joint replace your old ball joint to give you a more accurate feel with the steering
. Camber adjustable . OEM direct replacement . Regular greasing not required . No noise or squeaks
COMPATIBLE VEHICLES
Honda Civic Type R | FK2 2.0T K20C1 | 2015+
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.
AVAILABILITY
2-5 Workings Days
Hardrace Front Sway Bar 25.4MM 5PCS SET | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Regular price
£298.95 GBP
Sway Bar affects the handling and the car’s oversteer and understeer. It ties the lower suspension links together across the front or back, will keep your car flat in turns instead of leaning over to one side. Hardrace sway bars provide better control especially at high speeds cornering
. Designed for OE direct replacement . Hollow internal structure . Heat-treated . Correction of under or oversteer . Improve more grip and better handling . Increased stability while during high-speed cornering
COMPATIBLE VEHICLES
Honda Civic Type R | FK2 2.0T K20C1 | 2015+
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.
AVAILABILITY
2-3 WEEKS
Öhlins Road & Track Coil Over Suspension Kit | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2017
Regular price
£2,170.00 GBP
DESCRIPTION
General Features:
DFV technology (Dual Flow Valve)
Height adjustable
Rebuildable
Corrosion salt spray tested (ISO 9227)
2 year limited warranty
Delivery Including springs
Features Front:
McPherson strut, upside down
Compression and rebound damping with one adjuster
Spring preload adjuster
Approx. 10 - 30 mm lower than standard with recommended setup
Spring rate 60 N/mm
Dustcovers
Use with original top mounts
Features Rear:
Conventional Shock Absorber
Compression and rebound damping with one adjuster
Spring preload adjuster
Approx. 10 - 30 mm lower than standard with recommended setup
Spring rate 50 N/mm
Dustcovers
Use with original top mounts
Additional Options:
EDC Cancellation Kit 35020-20 (not included)
TECH SPEC
Please explore the Features of DFV Technology in the link below: