From the Eibach garage to the Nürburgring Nordschleife! Equipped with our newly developed Pro-Kit, the Toyota Yaris GR from NexD rolls out of our yard to do its first laps in the Green Hell this weekend. The Japanese car did not make the development work easy for us, but our engineers have developed performance springs for the Yaris GR too, which meet our high quality standards and will give you a lot of joy and driving pleasure! The Pro-Kit with a lowering of approx. 25mm on front and rear axle

WHAT'S IN THE BOX

• 4 Springs

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

2-15 DAYS

HKS Hipermax IV GT Spec 20 coilover kit for GR Yaris 1.6 Turbo 4WD

HKS's coilover kit is designed for sports road and street driving, by carefully optimising spring and damper rates a comfortable & sporty ride can be had at lower ride heights.

TECH SPEC

• Single Tube Damper Design

• Mono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and centre of gravity gives a more stable ride.

• Dust Boot
  Protect the shaft from the flying stones.

• 30 Step Damping Force Adjustment
  30 levels of dampening adjustment allow fine tune adjustment for street or circuit.

WHAT'S IN THE BOX

• 4 x 30 way adjustable shocks
• Front - upper mounts not included - use oem
• Rear - upper mount assembly - rubber
• Spring rate - Front 7kg, Rear 6kg
• Height adjustment range - Front 0 to -45mm, Rear 0 to -47mm

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

2-15 DAYS

The Street ZERO-A Suspension Kit for the new Toyota Yaris GR features a full height adjustable system enables the perfect ride height adjustment without sacrificing damper stroke or spring preload. The newly developed 40 way adjustable twin-tube shock absorber system enables a wide range of suspension setting suitable for virtually any given road condition.

Comes with Pillowball Top Mounts for adjustability and stability for track driving.

Each coilover suspension is specially valved and dimensionally designed per vehicle application. The new CPRV valve is a pressure dependent system where it prevents the piston speed from falling below a sufficient "comfort" level. This suspension coilover unit does it all, from street to circuit, and its 40 way needle valve dampening characteristics can be changed with a single push of a button.

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

1-4 weeks

The Street ZERO-A Suspension Kit for the new Toyota Yaris GR features a full height adjustable system enables the perfect ride height adjustment without sacrificing damper stroke or spring preload. The newly developed 40 way adjustable twin-tube shock absorber system enables a wide range of suspension setting suitable for virtually any given road condition.

Factory upper mounts are re- used for those who prefer comfort, or Cusco pillowball upper mounts (sold separately) can be incorporated into the kit for more adjustment capabilities and direct road feedback.

Each coilover suspension is specially valved and dimensionally designed per vehicle application. The new CPRV valve is a pressure dependent system where it prevents the piston speed from falling below a sufficient "comfort" level. This suspension coilover unit does it all, from street to circuit, and its 40 way needle valve dampening characteristics can be changed with a single push of a button

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

1-4 weeks

A Cusco Power Brace adds rigidity to your vehicle, reducing the amount the body flexes under load. This provides more direct handling.

• Designed to use factory mounting points
• Rigid steel construction

Cusco's Power Brace range is designed to add rigidity to your vehicle. Bolting onto factory mounting points, and then bracing those two points with a high strength bar, the Cusco Power Brace reduces flex under load.

A more rigid body means a more direct connection between you and the road. This reduces power lost to chassis twist and enhances grip during hard cornering or braking.

TECH SPEC

• Enhanced grip
• Allows you to get more power down
• Easy to fit

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

1-10 DAYS

CUSCO suspension parts are designed to improve vehicle handling characteristics, whether used alone or with other CUSCO parts. These performance parts enable precise suspension adjustment and should be highly considered when factory components are not sufficient enough for the demanding type of motorsports the end user participates in. It also compliments other high performance modifications the vehicle has undergone, such as high grip tires by limiting factory bushing slop and giving more direct feel of the road surface.

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

1-2 WEEKS

CUSCO suspension parts are designed to improve vehicle handling characteristics, whether used alone or with other CUSCO parts. These performance parts enable precise suspension adjustment and should be highly considered when factory components are not sufficient enough for the demanding type of motorsports the end user participates in. It also compliments other high performance modifications the vehicle has undergone, such as high grip tires by limiting factory bushing slop and giving more direct feel of the road surface.

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

1-2 WEEKS

The camber kit allows fine adjustments to the rear end camber setting of the vehicle. It can either help improve cornering grip or get your car back to original alignment specs after lowering. The arms are made of stamped steel alloys to offer greatest strength and durability. With premium quality pillow ball bushings equipped, they also provide more precise and solid handling response over the factory components.

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

1-2 WEEKS

A Cusco Anti-Roll Bar firms up your car's suspension during cornering, reducing body roll and allowing you to finetune grip balance.

TECH SPEC

• Reduced body roll for enhanced grip
• Tame understeer or oversteer
• Ideal alone or as part of package

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+
• Other Cars may be compatible. Please check before purchasing

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

• Bolts on to factory mounted bolt holes
• Durable blue painted coating protects metal
• Help extend the life of your car’s chassis by reducing the wear and tear to the body

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

1-2 WEEKS

CUSCO offers specially formulated pillowball / hard rubber, urethane bushing kits. The increased stiffness minimises, or in the pillowball's case - completely eliminates unwanted soft rubber bushing deflection under high loads, keeping the overall suspension geometry under static state.

This enables the vehicle to perform optimally to their intended alignment setting. These bushings are engineered specifically for each vehicle application and are direct replacements for the factory components. Several material ingredients are available from urethane, hard rubber to pillowball assemblies depending on which replacement part on type of vehicle will be installed on.

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

1-2 WEEKS

CUSCO offers specially formulated pillowball / hard rubber, urethane bushing kits. The increased stiffness minimises, or in the pillowball's case - completely eliminates unwanted soft rubber bushing deflection under high loads, keeping the overall suspension geometry under static state.

This enables the vehicle to perform optimally to their intended alignment setting. These bushings are engineered specifically for each vehicle application and are direct replacements for the factory components. Several material ingredients are available from urethane, hard rubber to pillowball assemblies depending on which replacement part on type of vehicle will be installed on.

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

1-2 WEEKS

CUSCO offers specially formulated pillowball / hard rubber, urethane bushing kits. The increased stiffness minimises, or in the pillowball's case - completely eliminates unwanted soft rubber bushing deflection under high loads, keeping the overall suspension geometry under static state.

This enables the vehicle to perform optimally to their intended alignment setting. These bushings are engineered specifically for each vehicle application and are direct replacements for the factory components. Several material ingredients are available from urethane, hard rubber to pillowball assemblies depending on which replacement part on type of vehicle will be installed on.

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

1-2 WEEKS

CUSCO offers specially formulated pillowball / hard rubber, urethane bushing kits. The increased stiffness minimises, or in the pillowball's case - completely eliminates unwanted soft rubber bushing deflection under high loads, keeping the overall suspension geometry under static state.

This enables the vehicle to perform optimally to their intended alignment setting. These bushings are engineered specifically for each vehicle application and are direct replacements for the factory components. Several material ingredients are available from urethane, hard rubber to pillowball assemblies depending on which replacement part on type of vehicle will be installed on.

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

1-2 WEEKS

CUSCO offers specially formulated pillowball / hard rubber, urethane bushing kits. The increased stiffness minimises, or in the pillowball's case - completely eliminates unwanted soft rubber bushing deflection under high loads, keeping the overall suspension geometry under static state.

This enables the vehicle to perform optimally to their intended alignment setting. These bushings are engineered specifically for each vehicle application and are direct replacements for the factory components. Several material ingredients are available from urethane, hard rubber to pillowball assemblies depending on which replacement part on type of vehicle will be installed on.

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

1-2 WEEKS

CUSCO offers specially formulated pillowball / hard rubber, urethane bushing kits. The increased stiffness minimises, or in the pillowball's case - completely eliminates unwanted soft rubber bushing deflection under high loads, keeping the overall suspension geometry under static state.

This enables the vehicle to perform optimally to their intended alignment setting. These bushings are engineered specifically for each vehicle application and are direct replacements for the factory components. Several material ingredients are available from urethane, hard rubber to pillowball assemblies depending on which replacement part on type of vehicle will be installed on.

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

1-2 WEEKS

A Cusco Anti-Roll Bar firms up your car's suspension during cornering, reducing body roll and allowing you to finetune grip balance.

TECH SPEC

• Reduced body roll for enhanced grip
• Tame understeer or oversteer
• Ideal alone or as part of package

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

1-10 DAYS

A Cusco Power Brace adds rigidity to your vehicle, reducing the amount the body flexes under load. This provides more direct handling.

• Designed to use factory mounting points
• Rigid steel construction

Cusco's Power Brace range is designed to add rigidity to your vehicle. Bolting onto factory mounting points, and then bracing those two points with a high strength bar, the Cusco Power Brace reduces flex under load.

A more rigid body means a more direct connection between you and the road. This reduces power lost to chassis twist and enhances grip during hard cornering or braking.

TECH SPEC

• Enhanced grip
• Allows you to get more power down
• Easy to fit

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

1-10 DAYS

A Cusco Power Brace adds rigidity to your vehicle, reducing the amount the body flexes under load. This provides more direct handling.

• Designed to use factory mounting points
• Rigid steel construction

Cusco's Power Brace range is designed to add rigidity to your vehicle. Bolting onto factory mounting points, and then bracing those two points with a high strength bar, the Cusco Power Brace reduces flex under load.

A more rigid body means a more direct connection between you and the road. This reduces power lost to chassis twist and enhances grip during hard cornering or braking.

TECH SPEC

• Enhanced grip
• Allows you to get more power down
• Easy to fit

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

1-10 DAYS

A Cusco Power Brace adds rigidity to your vehicle, reducing the amount the body flexes under load. This provides more direct handling.

• Designed to use factory mounting points
• Rigid steel construction

Cusco's Power Brace range is designed to add rigidity to your vehicle. Bolting onto factory mounting points, and then bracing those two points with a high strength bar, the Cusco Power Brace reduces flex under load.

A more rigid body means a more direct connection between you and the road. This reduces power lost to chassis twist and enhances grip during hard cornering or braking.

TECH SPEC

• Enhanced grip
• Allows you to get more power down
• Easy to fit

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

1-10 DAYS

HARDRACE adjustable stabilizer link with adjustable ball joint always level to horizontal to match ride height of vehicle. Precision assembly production enables spheroid, self-lubricating plastic bearing and bracket has a tight joint, providing a high quality and longer life.

COMPATIBLE VEHICLES

• Toyota Yaris GR | FXE | 2021+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

1-2 WEEKS

 Swave & Summit Front or Rear Adjustable Stabilizer Drop Links Kit. These are made from Alloy material made out of T6061-T6 Aluminium Forged alloy on the centre alloy part.

Honda FK8 Front Stabiliser Drop link Use 10MM/280MM - Direct OEM Fit

Honda FK2 Front Stabiliser Drop link Use 10MM/320MM - Direct OEM Fit

TECH SPECS

• Universal forged material made out of T6061-T6 precipitation-hardened aluminium alloy
• 2 options of 10MM and 12MM diameter
• 9 different length size options to fit almost any car
•  Powder-coated in metallic Orange
• Non-hollow tube which uses a monocoque Aluminium triple forged tube shaft, which makes them incredibly lightweight but is also exceptionally strong.
• Upgrades your chassis performance and thereby improving your car handling and driving experience
•  Chassis reinforcement equipment improves chassis rigidity & reduces un-wanted chassis flex.

WHAT'S IN THE BOX 

• 1 x pair of Swave & Summit Front &/or Rear Adjustable Stabiliser Drop Links

COMPATIBLE VEHICLES

• Universal fitment 
  

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

Contact us for more information

AVAILABILITY

In Stock

Please allow 1-2 days for dispatch