DESCRIPTION

High-performance coolant is released by HKS, the expert of the engine tuning.

“Ultimate Cooling Performance for Winning!!” 

• HKS SUPER Coolant Racing Pro is a racing type coolant that provides excellent cooling performance for your vehicle.
• High anti-foaming, rust & corrosion prevention, withstanding a long duration of usage.
• Usage environment must be considered since the freezing temperature is -1℃.
• Pre-diluted coolant. Just pour straight into the cooling system and you're ready to go!
• Made in JAPAN" - High Quality

TECH SPECS

• Product: Radiator Fluid
• Base: Pure Water
• Component: Rust Preventive Agent & Cooling Agent
• Volume: 4L
• Color: Blue
• Freezing Temperature: -1℃ (Central Value)
• Replacement Interval: 2-3 years

COMPATIBLE VEHICLES

• Universal
  
• FK8 Volume 4.6L
• FK2 Volume 6.7L

AVAILABILITY

In-Stock

MoCool is a coolant additive that will reduce the cooling system operating temperature by as much as 15 degrees C (30 degrees F).

This performance additive offers better heat transfer than normal coolants. The unique formula also contains rust and corrosion inhibitors.

Designed to be used with a Pure water at a dilution of 5% (20:1) for competition use where monoethyleneglycol is not allowed. The normal water/coolant mix at 5% of volume. It can be used with all aluminium, cast iron, copper, brass and bronze cooling systems.

500ml

AVAILABILITY

Stock Item

Now available in a new colour - body and upper part painted with glossy black paint and funnel with grainy crystal black paint.

HKS Super SQV (Sequential Blow Off Valve) uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure.

This Super SQV maximizes the charge-response that repeats pressure-charging and pressurized air relief by the throttle on and off and supports new generations of turbocharged vehicles.

Factory recirculation valve sound cannot be noticed, but once HKS Super SQV IV is installed, its unique & sharp high frequency sound demonstrates its existence. Super SQV IV significantly increases its presence and improve the engine compartment appearance. To match with the appearance created by HKS Intercooler Piping Kit, the buff-polished casting pipe is included. By both the sound and appearance, Super SQVIV increases the fun to drive.

TECH SPECS

• High-Quality Aluminium Die-Cast Body - Combines the ultimate in looks and durability in the engine compartment.
• High Stiffness Metal Die-Cast Valve - Reliable operation
• Triple Fin Design - Triple Fins set at the center of the funnel produces a dynamic and aggressive sound.
• Pull-Type Relief Valve Operation - More precise relief of excess boost and is compatible for a wider range of boost pressure
• Primary Valve (Small) - Lift off the throttle, and the primary valve instantly opens, quickly discharging initial excess boost pressure.
• Secondary Valve (Large) - Combined with the Primary Valve to provide optimal blow-off operation from low to high boost ranges
• Dual Valve Structure, Sequential System - At low boost ranges the Primary Valve opens, and at high boost ranges the Secondary Valve also opens, resulting in linear response and optimal blow-off operation at all boost levels.

WHAT'S IN THE BOX 

• 1 - Super SQV4 Black Edition BOV Assembly

COMPATIBLE VEHICLES

•  Universal - Turbocharged

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. 

AVAILABILITY

Stock expected in mid-July.

Stay Frosty race ready coolant from VP Racing has been developed specifically for race cars which require additional cooling. The glycol free formula has been proven to reduce coolant temperature by up to 37 degrees C (100 deg F) compared to traditional glycol based coolants.

• Developed for race engines requiring additional cooling
• Glycol free so no slippy residue if it gets spilled on track
• Can reduce temperatures up to 37 degrees C (100 degrees F)
• Ready to use, simply pour in
• 3.785 Litres Per bottle

Stay Frosty race ready coolant has been developed using input from engine builders and race teams to create a formula suitable for race engines which run at hotter temperatures than their street counterparts. It comprises of a special blend of wetting agents which are highly effective at transferring heat away from cylinder heads. It is 100% water based and is non toxic.

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Please contact us for more information. 

AVAILABILITY

In stock

HKS Super SQV (Sequential Blow Off Valve) uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles.

Typical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reached. If the spring load setting is too strong, the valve may not open at low boost. The Super SQV will operate under any boost pressure setting without spring load settings.

HKS original 3-chamber structure ensures the stable operation of blow-off valve regardless of the amount of pressure. Large 51mm valve performs great with high power and large displacement engines. Adjustable pre-load allows a wide range of application.

3-chamber System: Typical blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the boost pressure may be relieved under high boost, and the desired boost setting may not be reached. If the spring load setting is too strong, the valve may not open at low boost.

HKS RACING SQV utilizes a reliefless type; therefore, it delivers stable operation at all boost levels.
Durability tests of over 1 million operations minimizes the chances of valve stick and achieves high durability.

HKS "RACING SQV" Structure, HKS Original 3-chamber System

HKS' original 3-chamber structure ensures the stable operation regardless of the amount of boost pressure.

TECH SPECS

• 51 MM large capacity valve.

• Chamber structure & reliefless valve.

• Adjustable spring.

• Weld on installation flange is included. Flange size is different from current SSQV.

WHAT'S IN THE BOX 

• 1 - Racing SQV BOV Assembly

COMPATIBLE VEHICLES

•  Universal - Turbocharged

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. 

AVAILABILITY

1-3 working days

DESCRIPTION

AIRTEC Motorsport front mount intercooler upgrade for the BMW M2 / M135I fitted with the N55 engine.

This freer-flowing intercooler is a direct replacement for the smaller and more restrictive OEM set up.

It features a stepped twin-core (130mm and 40mm) design for maximum frontal area in the limited space provided behind the bumper. Together with high-flow, moulded one-piece cast end tanks, the AIRTEC intercooler offers much greater efficiency and volume over standard.

Despite this improvement, it fits neatly behind the original bumper, requires no trimming or cutting and can be used with the original boost hoses and connections. The comprehensive fitting kit includes all the correct fixtures and fittings, step-by-step instructions with pictures and should take around 2-3 hours to complete.

The intercooler is available in Pro-Series Black finish and either with or without the AIRTEC logo.

Approx. dimensions:

– 130mm deep bottom core and 40mm deep top core

– 200mm high

– 600mm wide

TECH SPECS

• Stepped intercooler design for maximum flow
• Designed and manufactured in the UK by AIRTEC
• AIRTEC cast end tanks for improved airflow and unbeatable strength
• Reduced charge temps
• 3-year unlimited mileage warranty
• Available in Pro-Series black finish
• AIRTEC logo available at no extra charge
• Unbeatable value for money!

Choose from plain black, or add your choice of coloured AIRTEC logo free of charge.

Please note: Only available in Pro-Series Black

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

Contact us for more details

AVAILABILITY

In Stock allow 2-3 days for dispatch

• Ready-to-Use Premix High-Performance Engine Coolant
• Contains Wetting Agents for Better Cooling
• Non-Toxic Propylene Glycol Freeze Protection
• Reduces Temps Up To 20°C
• Maximizes Horsepower and Torque
• Protects all metals from corrosion/electrolysis, including aluminum
• Prevents scales/deposits that reduce heat transfer
• 3.785 Litres
  

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Please contact us for more information. 

AVAILABILITY

In stock

MOTUL AUTO COOL EXPERT -37°C is a long life ready to use cooling liquid, based on monoethylene glycol, using hybrid organic / non organic mix additive technology, named Hybrid Tech. This product can be mixed with all monoethylene glycol based coolants. Recommended for all cooling systems: passenger cars, heavy duty, construction and agriculture vehicles, gardening, ships, stationary engines.