DESCRIPTION

Dream Automotive front seat cover has been designed to protect the original seat upholstery from everyday wear and tear helping to maintain the resale value of your vehicle. 

Dream Automotive Front seat covers are made with Heavy-duty 6oz Nylon Fabric and are tailored to fit the FK8 Front seat, either Driver or passenger. The cover has a Dream Logo embroidered onto the seat upright.

Available in different colours.

All creases disappear once fitted and used for a week.

Sold as single items

Rear Seat Cover available to purchase HERE!

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017-2021

AVAILABILITY

In stock

Dream Automotive front seat cover have been designed to protect the original seat upholstery from everyday wear and tear helping to maintain the resale value of your vehicle. 

Dream Automotive Front seat covers are made with Heavy duty 6oz Nylon Fabric and are tailored to fit the FK2 Front seat, either Driver or passenger. The cover has a Dream Logo embroidered onto the seat upright with a zip at the back.

Available in different colours.

All creases disappear once fitted and used for a week

Sold as individual items

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015-16

AVAILABILITY

In stock

Wind Deflectors for Honda Civic Type R FK2  

Sold as a pair

TECH SPECS

• Direct OEM Fit

AVAILABILITY

Stock Item.

Please allow 1-2 days for dispatch

K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple.

K&N's replacement air filters are covered by their famous K&N Million-Mile Limited Warranty.

• Designed to boost horsepower and rate of acceleration
• Can be cleaned and used again
• High airflow with exceptional filtration
• Works with original equipment manufacturer vehicle electronics
• Will NOT void vehicle warranty 
• K&N's Million Mile Limited Warranty®

Lead time: In stock 

Dream Bonnet stripes as seen on our FK2 Demo car, 

Made from high tack Avery vinyl.

Available in three colours, black, silver, red. 

DESCRIPTION

Developed in conjunction with CG Motorsport we have a reworked and improved clutch kit to suit the FK2 Civic Type R. 

The clutch benefits from a 6 paddle ceramic friction plate and stiffer clutch pressure plate springs and 3 grooves on the face of the plate. Compatible with standard flywheel

TECH SPECS

• Allows for an increase in stock torque up to 40%
• Direct feel engagement and an extended life with the ceramic material
• A high-performance pressure plate to allow for greater power

WHAT'S IN THE BOX

• Clutch plate
• Pressure plate
• Release bearing

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Here are the important things you need to know:

• Fitting Cost - £504
• Fitting Time - 6 hours
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - No additional recommendations.

AVAILABILITY

Stock Item

Genuine honda washer bottle cap in black, with the dip tube.

As with all genuine Honda parts expect a perfect fit and performance. 

WHAT'S IN THE BOX 

• Sleeve Hub
• Carbon Synchros
• Spring Rings

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

Stock item.

DESCRIPTION

Alcantara Black suede gear stick gaiter replaces the existing leather gaiter.

The black suede and red stitching has been selected to complement and enhance the interior are in keeping with the OEM trimming on the door cards. 

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017+
• Honda Civic 10th Generation | FK4 | FK7 | 2016+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedford . Here are the important things you need to know:

• Required Additional Items/Services - No additional items or services needed.
  
• Dream Recommends - No items to recommend as this is the perfect product for your vehicle.

AVAILABILITY

Stock Item

DESCRIPTION

Alcantara Black suede gear stick gaiter replaces the existing leather gaiter.

The black suede and red stitching has been selected to complement and enhance the interior are in keeping with the OEM trimming on the door cards. 

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire, Here are the important things you need to know:

• Fitting Cost -
• Fitting Time -
• Required Additional Items/Services - No additional items or services needed.
• Dream Recommends - No items to recommend as this is the perfect product for your vehicle.

AVAILABILITY

Stock Item

DESCRIPTION

The finishing touch that looks good with any shift knob.

Introducing our classic and very functional shift boot collar design. Gone are the days of sagging shift boots, broken plastic shift boot collars, and shift boot collars that don't match the diameter or style of your shift knob. ACUITY designed this Shift Boot Collar Upgrade to allow the use of virtually any M10x1.5 shift knob in your Honda without sacrificing fit and finish between the shift boot and shift knob. This kit includes 2 binding nuts, one meant for flat-bottomed knobs, and the other meant for boss-bottomed knobs (like modern Civic Type R and Honda Factory Performance designs). The boot collar is reversible and can be flipped to match your knob's base diameter, whether it be a traditional narrow-bottomed knob or the newer style wide-bottomed knobs. An integral retaining feature lets you easily pop the boot collar on and off many times without problems, so you no longer have to worry about breaking the OEM plastic boot ring when removing your shift knob. The supplied binding nuts are turned and milled from stainless steel and have flats for a 12mm open-ended wrench.

WHAT'S IN THE BOX

• 1 x Shift Boot Collar
• 1 x Flat-Bottomed Knob Binding Nut
• 1 x Boss-Bottomed Knob Binding Nut
• 4 x Small Cable Ties

COMPATIBLE VEHICLES

• 1999-2009 Honda S2000 (All MT)
• 2002-2005 ACURA RSX-S
• 2002-2005 ACURA RSX (All MT)
• 2002-2006 Honda Integra R
• 2006-2011 Honda Civic Si
• 2006-2011 Honda Civic (All MT)
• 2009-2014 Honda Fit (All MT)
• 2015+ Honda Fit (All MT)
• 2012-2015 Honda Civic Si
• 2012-2015 Honda Civic (All MT)
• 2014+ Honda Fit (All MT)
• 2015-2016 Honda Civic Type R (FK2)
• 2016+ Honda Civic (All MT)
• 2017+ Honda Civic Si (FC1/FC3)
• 2017+ Honda Civic Type R (FK8)
• 2018+ Honda Accord (All MT)

Also fits most Honda M10x1.5 shifters. The fitment list above is simply vehicles where we have confirmed fitment.

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Here are the important things you need to know:

• Fitting Time - 0.5 Hours
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - No additional recommendations.
• Installation Guides

On some shift boots, the supplied zip ties may not reach around the whole boot. Avoid using a larger cable tie as it will not fit into the groove on the boot collar as well. Instead, use 2 of the supplied cable ties attached together to reach around the whole shift boot. The supplied cable ties are quite narrow and are selected to fit into the boot collar. If you need more cable ties, similar cable ties can be purchased (normally in black though) from most hardware stores near you.

AVAILABILITY

Stock Item

Genuine Honda under hood inner wing guards, as fitted to the European model FK8. 

Sold as a pair, including 2 x plastic clips

Stock Item

We are proud to announce our bespoke filter cones for 2018. This filter is a custom design which was developed to provide optimum airflow through our Eventuri housings where the filter is reverse mounted. It is a direct replacement for all of our intakes which use Eventuri carbon housings and will be fitted to all new intakes from 2018.

Filtration and Construction

Unlike many other intake companies who use a generic filter, we have carried out extensive R&D and invested significant funds into our own unique filter design, so that it is optimised in our Patent Pending reverse mounted configuration. The filtration medium is constructed from non-woven mesh and is ISO 5011 tested which conforms to the same filtration standard as OEM filters. The mesh is double layered and is dry which means that it will not damage MAF sensors with oil. Our filters feature 2 flow directing cones which have been carefully modelled to direct airflow as follows:

1. Internal Cone – designed to help direct incoming airflow through the filter and to create an even velocity profile across the length of the filtration material. This cone effectively helps airflow disperse across the filter without turbulence.

2. External Cone – CNC machined, with a very unique profile, which was extensively optimised to help pull the airflow down to the center and transition smoothly into the downstream tubing. This cone creates a controlled region of turbulence around the tip which increases the convergence speed of the air, so that the connecting tubing has a higher velocity profile of airflow leading to the engine

Airflow

The resulting flow through the filter and also smooth at the exit of the intake, to the connecting tube is smooth with a high velocity profile. In real terms, this means that the engine is able to draw air very efficiently, and the driver will be able to notice a sharper throttle response, as well as the power and torque improvements. Where the engine has a turbo(s) it will be able to achieve peak boost earlier as it will be working with less resistance. Tests have shown that our systems reduce the waste gate duty cycle by a significant percentage over the OEM system.

The following diagrams are CFD simulations showing velocity streamlines through our system – with the new filter and the original filter. 

Resulting Improvements

Through Dyno testing the Eventuri intakes back-to-back with the original filters vs the upgraded filters, we have found an additional power and torque gain. This validates our theoretical modelling and proves that the upgraded filters really have a significant impact on the airflow through the intake. The power gains over and above the original filters vary between vehicles, but here are some of the results we have measured so far. Please note – these graphs show the Eventuri intake with original filter vs upgraded filters. Not against the stock airboxes – which will now be an even larger gain!

Aesthetics

Aside from the technical improvements, the upgraded filters resemble the engines of an aircraft – resulting in a dynamic overall aesthetic once installed into the carbon housings. From the reverse – looking into the carbon housing – the laser etched outer cap is clearly visible surrounded by the filter mesh. An awe-inspiring sight.

Stock Item

Please note that we're unable to supply Eventuri Honda products to the following locations:

Belgium | Brunei | Indonesia | Luxembourg | Malaysia | Singapore | Thailand | The Netherlands | Vietnam

DESCRIPTION

Your OEM Bushings Suck:

Bad news: it's true. Honda intentionally makes their rubber shifter cable bushings very compliant in an effort to give the car a more tame feel. For many drivers, that's ideal. Unfortunately, this disconnects the driver from feeling the transmission during shifts, often leading to missed shifts or slow shifting in racing conditions. A less compliant plastic or metal bushing is the ideal solution, but without a spherical bearing, the bushing will cause the cables to bind and fatigue. That's why ACUITY has designed this kit with a custom acetal and aluminium spherical bushing. Also unlike most bushings on the market, ACUITY's design incorporates elastomer rings to provide the best fit possible with your cables. Experience a solid, smooth shift that will make you fall in love with your car again.

Understanding the Science of that Perfect Shift Feel:

Years of experience have taught the engineers at ACUITY that there are many elements to a refined, responsive shift. Compliance from flimsy components in the shift linkage leaves the driver feeling detached from the transmission. ACUITY combats this by replacing the OEM rubber bushings with much stiffer Acetal and 6061-T6 Aluminum. A large-diameter, custom spherical bearing minimizes long-term wear and tear while eliminating the binding that is caused by most aftermarket solid shifter cable bushings. Loose fitting components also contribute to a poor shifting feel. That's why ACUITY uses integral o-rings on the outside of each bushing to provide a perfect fit with your OEM cables. Tested on street cars, track cars, and ACUITY's unreasonably violent shifter testing machine, these bushings are designed to be robust and proven to last. Each bushing kit is laser etched with a unique serial number and includes stainless steel hardware to help prevent long-term corrosion, keeping your bushings looking great even longer. And if all of that isn't impressive enough, the bushings are over 20% lighter than their OEM counterparts, weighing in at only 48 grams (with hardware).

COMPATIBLE VEHICLES

• 2015-2016 Honda Civic Type R (FK2)
• 2017+ Honda Civic Sport (All 6MT)
• 2017+ Honda Civic Si (FC1/FC3)
• 2017+ Honda Civic Type R (FK8)

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:

• Fitting Cost - £48
• Fitting Time - 0.8 Hours
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - No additional recommendations.
• Installation Guides

AVAILABILITY

Stock Item

DESCRIPTION

90° Lambda Sensor Eliminator Spacer - required when removing the CAT from your vehicle to stop the mil light illuminating

NOTE: This product is for Race/Track use only and will NOT meet current UK emissions regulations

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

Contact us for more details

AVAILABILITY

In Stock

DESCRIPTION

Genuine Honda front H badge available in Gloss Black or Gloss Red.

TECH SPECS

• New star lock washer push fit clips are supplied with the badge.

FITTING DETAILS

DREAM offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:

• Fitting Cost -
• Fitting Time -
• Required Additional Items/Services - No additional items or services needed.
• Dream Recommends - No additional recommendations.

AVAILABILITY

Stock Item

PRO-SPACER | Wheel Spacers | System 4

• Made from high-tensile-strength aluminium alloy
• Exact fitment by using minimal production tolerances, resulting in exceptional wheel balance
• All applications tested in rigid durability and fatigue tests
• High-grade corrosion protection through a special coating process (salt spray test according to DIN 50021)
• Significant weight advantage compared to wheel-spacers made from steel

Eibach Pro-Spacer is the ideal combination for use with the Eibach Pro-Kit as well the Sportline, if the original or aftermarket wheels are missing that last optical "kick".

With the Eibach Pro-Spacer installed, the car looks wider and better, as the wheel fills the arch. That's how the cars look gets its final touch.

By increasing the track width, not only the appearance is improved, but you also achieve an optimized driving behaviour combined with higher stability, as the roll of the chassis is influenced in a positive manner.

Optimize the "sportive touch" to the last detail: wheels, tires, Eibach Suspension Components and Pro-Spacer!

You'll achieve optimum looks and enhanced handling by moving your wheels flush with the outer edges of the wheel wells. Simply measure the wheel-well/tyre gap, as shown here, and order the corresponding Pro-Spacers to put your wheels and tyres out where they belong.

Sold as pairs

15/18/20mm spacers will all require a small amount of grinding to the back of your OEM wheels in order to get the correct fitment. This cannot be seen once the wheel has been refitted. 

25mm Will bolt straight on 

AVAILABILITY

3-4 weeks

DESCRIPTION

The Right Way to Remove Interior Panels:

Often when installing things like shifters, gauges, speakers, or other interior modifications, it becomes necessary to remove interior panels. While screwdrivers can often be made to work, using them risks scratching the fragile plastic panels. This toolkit is designed to help remove interior panels and clips while reducing the risk of scratches or damages to the panels. These are a great add-on when installing an ACUITY shifter or shifter base bushings.

WHAT'S IN THE BOX

• 4 x unique pry tools

COMPATIBLE VEHICLES

• This product is designed to be a universal toolkit to aid in the removal of interior panels and their associated clips.

AVAILABILITY

Stock Item

 DESCRIPTION

Dream Automotive Upgraded silicone throttle body intake hose is designed to supersede the common issue of splitting OEM throttle body hoses.

Stepped internal shape to aid airflow and rigidity. 

TECH SPECS

• Direct OEM Fit

WHAT'S IN THE BOX 

• X1 silicon hose jointer 
• x2 hose clamps 

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015
• Honda Civic Type R | FK8 2.0T K20C1 | 2017+
• Ariel Atom 4 | 2.0T K20C1 | 2019+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

Out of stock - next batch due in October

K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple.

K&N's replacement air filters are covered by their famous K&N Million-Mile Limited Warranty.

• Designed to boost horsepower and rate of acceleration
• Can be cleaned and used again
• High air flow with exceptional filtration
• Works with original equipment manufacturer vehicle electronics
• Will NOT void vehicle warranty
• K&N's Million Mile Limited Warranty®

Lead time: In stock 

Genuine Honda Black lower sport mesh grille.

Direct replacement of silver lower mesh grill on the FK2. A great addition to black intercoolers keeping the front end stealth-like.

As with all genuine Honda parts expect a perfect fit and performance. 

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

Stock item.

DESCRIPTION

Replacement 100% prepreg carbon fibre intake pipe producing a peak gain of 12hp over the already impressive 18-20hp from the existing Eventuri Intake System

TECH SPECS

• 100% prepreg carbon fibre
• High-quality silicon coupler with internal steps & OEM specification hose clamps
• 12hp peak gain

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Here are the important things you need to know:

• Fitting Cost - 
• Fitting Time -
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - No additional recommendations.

AVAILABILITY

2-3 weeks (Red Carbon/Kevlar - Lead Time Varies)

Please note that we're unable to supply Eventuri Honda products to the following locations:

Belgium | Brunei | Indonesia | Luxembourg | Malaysia | Singapore | Thailand | The Netherlands | Vietnam

Genuine Honda 0W-20 Type 2.0 Synthetic Engine Oil 1 Litre

Premium Honda factory fill oil for use in automobile engines.

New Specification designed to meet Civic Type-R performance requirements

This type 2.0 oil is the recommended type of oil that should be used in the Type-R engine when either topping up or replacing.

If the Honda Genuine 0W-20 Type 2 oil is not available, then any oil which conforms to the technical specification of API SN, ILSAC GF-5, 0W 20 can be used.

AVAILABILITY

In Stock

Genuine Honda Rear H badge available in Gloss Red & Gloss Black

OEM fitment with plastic pins and double-sided adhesive