Built to our own exact requirements, our bolt in half cage will not only keep you safe in the event of an accident but looks good at the same time. 

Produced from Coldrawn seemless mild steel or T45 alloy/steel 45mm tubing featuring a double x brace with gusseted centers, along with built in harness bar, our cage allows full slide on both front seats to accommodate drivers of all sizes. 

Piece design using billet 2 bolt joiners attaching the 38mm infill rear section to the main 45mm front hoop. 

You will be required to drill a few holes in order to mount the cage through the floor and will bolt to the top of the rear shock mounts.

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

Contact us for more information.

AVAILABILITY

2-6 WEEKS

Lowering:

Front: 5-25mm
Rear: 15-35mm

-Civic 2-15+ Type R Turbo FK2

Lead time: 3 weeks

Designed and made by suspension Experts at Eibach to our specifications, this uprated 4 spring kit will offer a performance-focused ride height lowering the car by 20mm.

The lower center of gravity will offer improved handling and responsiveness whilst also enhancing the naturally aggressive stance of your FK2.

Made from the same quality Hi-Tensile steel as used by Eibach for all their springs from aftermarket through to F1, the springs go through a number of stages after coiling – pre-stress, shot peening and then electrostatically powder coated for longevity, so you can be confident you are investing in a quality solution for your Type R.

Finished in a Royal Glossy Silver and stamped with the notable names of both Dream and Eibach this is truly a ‘dream team' production.

Lead time: In stock 

PRO-SPACER | Wheel Spacers | System 4

• Made from high-tensile-strength aluminium alloy
• Exact fitment by using minimal production tolerances, resulting in exceptional wheel balance
• All applications tested in rigid durability and fatigue tests
• High-grade corrosion protection through a special coating process (salt spray test according to DIN 50021)
• Significant weight advantage compared to wheel-spacers made from steel

Eibach Pro-Spacer is the ideal combination for use with the Eibach Pro-Kit as well the Sportline, if the original or aftermarket wheels are missing that last optical "kick".

With the Eibach Pro-Spacer installed, the car looks wider and better, as the wheel fills the arch. That's how the cars look gets its final touch.

By increasing the track width, not only the appearance is improved, but you also achieve an optimized driving behaviour combined with higher stability, as the roll of the chassis is influenced in a positive manner.

Optimize the "sportive touch" to the last detail: wheels, tires, Eibach Suspension Components and Pro-Spacer!

You'll achieve optimum looks and enhanced handling by moving your wheels flush with the outer edges of the wheel wells. Simply measure the wheel-well/tyre gap, as shown here, and order the corresponding Pro-Spacers to put your wheels and tyres out where they belong.

Sold as pairs

15/18/20mm spacers will all require a small amount of grinding to the back of your OEM wheels in order to get the correct fitment. This cannot be seen once the wheel has been refitted. 

25mm Will bolt straight on 

AVAILABILITY

3-4 weeks

This is the latest step in the Öhlins Racing automotive philosophy – Road & Track by Öhlins.

A more than 30 year long tradition of high-end racing commitments and state-of-the-art solutions within advanced suspension technology is now available for street cars all over the world. The focus has been clear from the very beginning – superior road handling without sacrificing comfort in your day-to-day transports. The time of compromises is over. All shocks have suffered through vast corrosion tests according to ISO 9227. The end result is a 2-year limited warranty on all of our products - worldwide.

Öhlins Road & Track team has extensively tested a wide variation of springs to find the right balance between road and track use. By testing in different conditions on road as well on track, the listed spring rate is what we strongly recommend you to use.

General Features:

• DFV (Dual Flow Valve)
• Rebuildable
• Corrosion salt spray tested (ISO 9227)
• 2 year limited warranty
• Springs Included

• McPherson strut 
• Single bleed adjuster 
• Height adjustable (approx. 15-25 mm lower than standard)
• Coil springs (60 N/mm) 
• Use with original top mounts

• Conventional shock absorber 
• Single bleed adjuster 
• Height adjustable (approx. 15-25 mm lower than standard) 
• Coil springs (100 N/mm) 
• Use with original top mounts

• EDC Cancellation Kit 35020-20 (not included)

TECH SPEC

Please explore the Features of DFV Technology in the link below:

https://www.ohlins.eu/en/products/automotive/road-track/dfv/

WHAT'S IN THE BOX

• Coilover kit incl. springs and mounting parts
• C-Spanner (for spring preload adjustment)
• Owners manual and mounting instruction
• Sticker set
• Springs included

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2017

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Here are the important things you need to know:

• Fitting Time - 4 Hours
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - No additional recommendations.
• Installation guide
• Owners manual 

AVAILABILITY

Please contact us for lead time

DESCRIPTION

Rigid Collars are simple in their shape but clever in their design.

Rigid Collars are made from a secret blend of space materials which ensures they mount perfectly flat between the chassis and subframe taking up any imperfection in the mounting surfaces.

Rigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer.

This is achieved by the collar material, the tapered design and extremely high manufacturing tolerances.

AVAILABILITY

In stock 

Front lower ball joints to suit Honda Civic Type R FK2

Genuine Honda Service Part gives an additional 0.5 degree of negative camber compared to OEM part

Genuine Honda Service Part Dream Automotive Spec gives an additional 1.5 degrees of negative camber compared to OEM part

Sold as a pair

Lead time: 2 days 

DESCRIPTION

Cusco anti-sway bars replace the factory anti-sway bars (if equipped) and use the factory mounting locations. A Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one.  The larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.

TECH SPECS

• The bar is 25mm vs the standard which is 23mm, this offers an increase in rigidity of approx. 50%

WHAT'S IN THE BOX

• The item is designed to replace the standard item and includes all necessary hardware.

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Here are the important things you need to know:

• Fitting Time - 1.5 hours
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - No additional recommendations.

AVAILABILITY

3-5 Days

Hardrace 17mm rear anti-roll sway bar

Anti-roll sway bar affects the handling and the cars oversteer and understeer. It ties the lower suspension links together across the front or back, will keep your car flat in turns instead of leaning over to one side. Hardrace sway bars provide better control especially at high speeds cornering

. Designed for direct bolt-on
. Correction of under or oversteer
. Improve more grip and better handling 
. Increased stability while during high-speed cornering

Lead time: 2 weeks 

Alloy front strut brace for 2015 Civic Type R FK2.

Lead time: 2-3 weeks

Rear lower short chassis brace for 2015 civic type R FK2, 

Lead time: in stock 

 Front forged solid aluminium lower subframe braces for 2015 civic type R FK2, replaces existing braces, sold as a pair

Lead time: in stock 

Rear Lower Long 2-Point Body Chassis Tie Bar for 2015 civic type R FK2, 

Lead time: in stock 

Rear lower suspension brace for 2015 civic type R FK2, 

Lead time: in stock 

Front Lower 4-Point Subframe and Body Chassis Brace.

Lead time: In Stock 

DESCRIPTION

Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and use the factory mounting locations. A Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one.  The larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.

The FK2 Civic Type R from the factory isn't fitted with a rear sway bar, this product is designed to bolt to current mounting points and comes with the required hardware.

TECH SPECS

• The bar is 16mm in diameter. 

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Here are the important things you need to know:

• Fitting Time - 1/2 hour
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - No additional recommendations.

AVAILABILITY

3-5 Days

DESCRIPTION

For sport use, the D1 chromoly roll cages are recommended which are 33% lighter than conventional steel cages. Many different layouts are available, from dashboard escape type, through the dashboard type, rear window & roof regulation capacity (retains rear interior & enables passengers) to suit the needs of your vehicle use.

* Rollcages are not intended to protect against vehicular impact collisions
** Please use accompanying safety equipment (FIA & SFI approved) such as racing seats, helmet, and harnesses.

TECH SPECS

• 40mm OD chromoly material
• Cusco blue collar
• 4-Point, 5-Point, 6-Point, 7-Point and 8-Point available.
• Japanese MOT recognized/certified roll bar.
• Some chromoly roll bars are not recommended for competition.
• 6 point and up roll cages may require interior alteration (switches may have to be relocated and glove boxes modified).
• Left-hand drive and Right-hand drive configurations available.

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:

• Fitting Cost - 
• Fitting Time - 
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - No additional recommendations.

AVAILABILITY

6-8 Weeks

DESCRIPTION

These Power Braces are designed to stiffen up your chassis and help reduce vehicle body flex. When driving the car hard into corners, you will want to reduce the chassis flex and increase the rigidity of your car.

Developed by chassis engineers based on the data logged directly from CUSCO motorsports research. The Powerbrace strengthens the chassis and minimizes body ­flex, especially at cornering loads, enabling optimal suspension movement at the intended geometrically aligned state. Having the same effect as stitch welding a chassis, the Powerbrace series is 100% bolt-on and completely effective on all vehicle chassis no matter whether stock or highly modified.

These bars are lightweight and engineered inside & out by using the state of the art chassis stress test simulation software by leading motorsports professionals.

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton. Contact us for more information.

AVAILABILITY

Stock due Mid-December

• Avoids error messages when changing the suspension
• Only the standard damper control is shut down and at the same time it prevents error messages
• Functions of the control unit remain fully
• Can also be used for other manufacturers and OE aftermarket suspensions separately

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Contact us for more information 

AVAILABILITY

12-14 days

DESCRIPTION

HARDRACE front lower ball joint replace your old ball joint to give you a more accurate feel with the steering

. OEM direct replacement
. Regular greasing not required
. No noise or squeaks

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

2-7 Workings Days

DESCRIPTION

HARDRACE front lower ball joint replace your old ball joint to give you a more accurate feel with the steering

. Camber adjustable
. OEM direct replacement
. Regular greasing not required
. No noise or squeaks

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

2-5 Workings Days

Sway Bar affects the handling and the car’s oversteer and understeer. It ties the lower suspension links together across the front or back, will keep your car flat in turns instead of leaning over to one side. Hardrace sway bars provide better control especially at high speeds cornering

. Designed for OE direct replacement
. Hollow internal structure
. Heat-treated
. Correction of under or oversteer
. Improve more grip and better handling
. Increased stability while during high-speed cornering

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

2-3 WEEKS

 Swave & Summit Front or Rear Adjustable Stabilizer Drop Links Kit. These are made from Alloy material made out of T6061-T6 Aluminium Forged alloy on the centre alloy part.

Honda FK8 Front Stabiliser Drop link Use 10MM/280MM - Direct OEM Fit

Honda FK2 Front Stabiliser Drop link Use 10MM/320MM - Direct OEM Fit

TECH SPECS

• Universal forged material made out of T6061-T6 precipitation-hardened aluminium alloy
• 2 options of 10MM and 12MM diameter
• 9 different length size options to fit almost any car
•  Powder-coated in metallic Orange
• Non-hollow tube which uses a monocoque Aluminium triple forged tube shaft, which makes them incredibly lightweight but is also exceptionally strong.
• Upgrades your chassis performance and thereby improving your car handling and driving experience
•  Chassis reinforcement equipment improves chassis rigidity & reduces un-wanted chassis flex.

WHAT'S IN THE BOX 

• 1 x pair of Swave & Summit Front &/or Rear Adjustable Stabiliser Drop Links

COMPATIBLE VEHICLES

• Universal fitment 
  

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

Contact us for more information

AVAILABILITY

In Stock

Please allow 1-2 days for dispatch

DESCRIPTION

These Power Braces are designed to stiffen up your chassis and help reduce vehicle body flex. When driving the car hard into corners, you will want to reduce the chassis flex and increase the rigidity of your car.

Developed by chassis engineers based off‑ the data logged directly from CUSCO motorsports research. The Powerbrace strengthens chassis and minimizes body ­flex especially at cornering loads, enabling optimal suspension movement at the intended geometrically aligned state. Having the same effect as stitch welding a chassis, the Powerbrace series is 100% bolt-on and completely effective on all vehicle chassis no matter whether stock or highly modified.

These bars are lightweight and engineered inside & out by using the state of the art chassis stress test simulation software by leading motorsports professionals.

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton. Contact us for more information.

AVAILABILITY

3-5 Days

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

2-5 Working Days