Öhlins Road & Track Coil Over Suspension Kit | Honda Civic Type R | FK8 | 2.0T K20C1 | 2017+

Öhlins Road & Track Coil Over Suspension Kit | Honda Civic Type R | FK8 | 2.0T K20C1 | 2017+

£2,540.00 GBP

This is the latest step in the Öhlins Racing automotive philosophy – Road & Track by Öhlins.

A more than 30 year long tradition of high-end racing commitments and state-of-the-art solutions within advanced suspension technology is now available for street cars all over the world. The focus has been clear from the very beginning – superior road handling without sacrificing comfort in your day-to-day transports. The time of compromises is over. All shocks have suffered through vast corrosion tests according to ISO 9227. The end result is a 2-year limited warranty on all of our products - worldwide.

Öhlins Road & Track team has extensively tested a wide variation of springs to find the right balance between road and track use. By testing in different conditions on road as well on track, the listed spring rate is what we strongly recommend you to use.

General Features:

DFV (Dual Flow Valve)
Rebuildable
Corrosion salt spray tested (ISO 9227)
2 year limited warranty
Springs Included in the Package

Front feature:

McPherson strut
Single bleed adjuster
Height adjustable (approx. 15-25 mm lower than standard)
Coil springs (60 N/mm)
Use with original top mounts

Rear Feature:

Conventional shock absorber
Single bleed adjuster
Height adjustable (approx. 15-25 mm lower than standard)
Coil springs (100 N/mm)
Use with original top mounts

Additional Options:

EDC Cancellation Kit 35020-20 (not included)

TECH SPEC

NOT TÜV Approved

Please explore the Features of DFV Technology in the link below:

https://www.ohlins.eu/en/products/automotive/road-track/dfv/

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton.

Fitting Time - 4 Hours
Required Additional Items/Services - No additional items or services needed.
Dream Automotive Recommends - No additional recommendations.
Installation guide
Owners manual

AVAILABILITY

Please contact us for lead time

KW Coilover Kit Variant 3 Inox | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

KW Coilover Kit Variant 3 Inox | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£1,967.95 GBP

KW Coilover kit Variant 3 inox ( incl. deactivation for electronic damper)

KW Variant 3 "inox-line"

Unlimited individuality for performance & comfort.
Damping forces can be adjustment separately in rebound & compression.
Our engineers have developed a sporty yet harmonious basic setup, as with any KW coilover kit. To be able to guarantee the perfect suspension setup we test on our KW 7-post rig, as well as extensive driving tests on country roads, motorways and even on the Nürburgring Nordschleife. For years, the KW coilover kit Variant 3 "inox-line" is one of the top aftermarket products and is a benchmark for coilovers. It convinces sports car drivers, tuner, large-and small series manufacturer such as Alpina, MTM, Manthey, Oettinger and many more leading companies in the international automotive industry with its damping characteristics, quality finish and durability.

Advanced technology from motor sport
With the KW coilovers Variant 3 "inox-line" you will get much more than just a sporty lowering and excellent driving behaviour on all roads. It is based on our long experience as a suspension manufacturer and supplier for international motor sport, such as the touring car series ADAC GT Masters, FIA GT1, FIA GT3, International GT Open, WTC, VLN and the legendary ADAC Zurich 24h-race Nürburgring.

Similar to our racing coilovers from the KW Competition program, the KW coilovers Variant 3 "inox-line" can be adjusted independently in compression and rebound damping. This individual adjustment possibility is much appreciated by sports car manufacturers, tuners and drivers worldwide.

The perfect suspension setup for more driving pleasure
If you have already made your first performance modifications to your vehicle our KW coilovers Variant 3 will compliment your upgrades. The patented KW-valve technology for separate adjustment of rebound and compression damping allows you to individually setup your suspension.The adjustable KW bottom valve adjusts the low-speed range of the compression level in twelve clicks.

You don’t need any adjusting tools because of the patented compression adjuster at the lower end of the stainless steel housing. The adjustable compression damping with its twelve exact clicks allows you to manually influence body roll, without having to change the spring rate which optimally matches the rebound.

With the individually adjustable rebound setup of the KW coilover Variant 3 "inox-line", you can directly influence the handling and comfort with its precise click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers on the upper end of the piston rod will be adjusted via an integrated adjustment wheel or a twist-adjustment wheel which is included in the delivery content.

By increasing the rebound force via the adjustment wheel body movements are reduced. You will have more stability during high speed cornering. If you change for example the wheel / tire combination (approved by the car manufacturer) to larger wheels, then with a KW coilover Variant 3 "inox-line" you will be able to adjust the car's handling perfectly.
Print product description

High quality, individual and durable
The KW coilover Variant 3 "inox-line" kit and every single damper are subject to extensive quality tests during production to meet the high standards of our KW quality management. This is the only way we can meet our expectations to give up to five years warranty on our KW coilover Variant 3 "inox-line" when installed at one of our KW specialist dealer. KW coilover struts made of stainless steel are 100% rust-free and an unlimited life time.

Therefore the operation of the continuous lowering via the dirt-resistant KW trapezoid thread and the KW composite collar is also not affected after years. By the individual lowering with its continuous adjustment range, you can emphasize the sportiness of your vehicle visually. A feature that is very popular in the performance-oriented tuning scene.

Parts Certificate: Click Here

TECH SPECS

Rebound and compression damping adjustable damper technology
Stainless steel technology "inox-line"
Individual, continuous lowering
tested adjustment rang
High quality components for a long life
Complete documentation for an easy handling
Adjustable rebound damping with 16 exact clicks
Adjustable compression damping with 12 exact clicks
Unique, independent from each other working damping force adjustment

Setup: The individual adjustable rebound- & compression damping of the KW Variant 3 "inox-line"
The KW coilover kit Variant 3 "inox-line" is the perfect accessory for performance-oriented drivers and tuning enthusiasts who put a great demand on their suspension. The separately rebound and compression damping adjustable dampers with their "well-thought-through" click adjustment allow a perfect setup. So it is easy to influence the steering behaviour, directional stability, tire grip and handling characteristics when driving on the limit.

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Contact us for more information

AVAILABILITY

May take up to 8 weeks

HKS Hipermax MAX IV SP Coilover Kit With Optional Suspension Error Canceler | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

HKS Hipermax MAX IV SP Coilover Kit With Optional Suspension Error Canceler | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£2,340.00 GBP

DESCRIPTION

The Hipermax IV SP brings a suitable damper setting that reduces unnecessary movement in sports use, which also improves drivability and creates more grip on tires with fast response in cornering. Increasing spring rate reduces the body roll, and the single tube inverted type provides sharp and direct handling. The camber adjustable pillow upper for the front side and original upper mount design for the rear side. The separated type of spring for the rear side utilizes the direct coil spring with selected rate.

The optional Suspension Error Canceller available with this package cancels the dashboard error message that appears when the stock suspension is removed.

TECH SPECS

Single Tube Damper Design - Monotube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and centre of gravity gives a more stable ride. The single tube inverted type for the front side, instead of the shock body length adjustable type, inserting the cylinder into the knuckle insertion achieves high rigidity and secures the stroke quantity that cannot be provided by a shock body length adjustable type. For the rear, the Single Tube Shock Body Length Adjustable Type High-strength billet aluminium bracket reduces the unsprung weight. This single tube shock absorber with a large-diameter piston provides comfortable riding quality without unpleasant upthrust feeling. A high level of ride quality and handling are provided.
Dust Boot - Protect the shaft from the flying stones.
PNE Coating - Using this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.
M Shaft (Φ46 normal type) - With the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.
Pillow Ball Upper Mount - Camber adjustable pillow upper is installed to the front side. The camber can be adjusted according to the tire size and/or
driving conditions for more accurate and sharp steering.
New Design Needle - Newly designed needle has been used to revise the very low speed and middle and high-speed dampening which is key to a comfortable ride.
Reduction of Unsprung Weight - In order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)
30 Step Damping Force Adjustment - 30 levels of dampening adjustment allow fine tune adjustment for street, circuit, winding roads, highway, or the weight of the vehicle. For track day use HKS recommends dial position 12 for the front and 10 for the rear.

WHAT'S IN THE BOX

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:

Fitting Cost - £
Fitting Time - Hours
Required Additional Items/Services - No additional items or services needed.
Dream Automotive Recommends - No additional recommendations.

AVAILABILITY

3-5 Days

MeisterR GT1 Coilovers | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

MeisterR GT1 Coilovers | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£1,849.00 GBP

Product Description

MeisterR GT1 are developed in collaboration with Black Art Design (B.A.D.) of UK who have a track record of designing suspension from championship winning race car to OEM application. Using advanced and precision CNC internal parts manufactured in MeisterR UK workshop, the GT1 is designed to be the best in precision engineering and suspension performance.

All Meisterr GT1 feature our unique Staggered Digressive Valve (SDV) technology which enables the damper to absorb uneven surfaces whilst retaining excellent steering response and control. This unique valve technology provides responsive turn in, superior chassis control and sublime ride comfort. Our advanced suspension technology provides excellent all round performance on the road and track without compromise.

Main Features:
32-stage damping adjustments (Compression and Rebound Combined)
Staggered Digressive Valve (SDV) technology provided unique digressive damping curve on compression and rebound.
Independent ride height and springs pre-load adjustment.
Bump Stop and Rubber Boot included.
2 year limited warranty.

Spring Rate and Information:
Front Top Mount: Aluminium with Spherical Bearing and Camber Adjustment
Front Spring Rate: 7 kg/mm
Rear Top Mount: No Top Mount
Rear Spring Rate: 6 kg/mm

Please note: GT1 is a custom built coilover with lead time of 3 to 4 weeks.

KW Coilover Variant 3 Inox | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

KW Coilover Variant 3 Inox | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£1,782.95 GBP

KW Variant 3 "inox-line" Without cancelation Kit

Unlimited individuality for performance & comfort.
Damping forces can be adjustment separately in rebound & compression.
Our engineers have developed a sporty yet harmonious basic setup, as with any KW coilover kit. To be able to guarantee the perfect suspension setup we test on our KW 7-post rig, as well as extensive driving tests on country roads, motorways and even on the Nürburgring Nordschleife. For years, the KW coilover kit Variant 3 "inox-line" is one of the top aftermarket products and is a benchmark for coilovers. It convinces sports car drivers, tuner, large-and small series manufacturer such as Alpina, MTM, Manthey, Oettinger and many more leading companies in the international automotive industry with its damping characteristics, quality finish and durability.

Advanced technology from motor sport
With the KW coilovers Variant 3 "inox-line" you will get much more than just a sporty lowering and excellent driving behaviour on all roads. It is based on our long experience as a suspension manufacturer and supplier for international motor sport, such as the touring car series ADAC GT Masters, FIA GT1, FIA GT3, International GT Open, WTC, VLN and the legendary ADAC Zurich 24h-race Nürburgring.

Similar to our racing coilovers from the KW Competition program, the KW coilovers Variant 3 "inox-line" can be adjusted independently in compression and rebound damping. This individual adjustment possibility is much appreciated by sports car manufacturers, tuners and drivers worldwide.

The perfect suspension setup for more driving pleasure
If you have already made your first performance modifications to your vehicle our KW coilovers Variant 3 will compliment your upgrades. The patented KW-valve technology for separate adjustment of rebound and compression damping allows you to individually setup your suspension.The adjustable KW bottom valve adjusts the low-speed range of the compression level in twelve clicks.

You don’t need any adjusting tools because of the patented compression adjuster at the lower end of the stainless steel housing. The adjustable compression damping with its twelve exact clicks allows you to manually influence body roll, without having to change the spring rate which optimally matches the rebound.

With the individually adjustable rebound setup of the KW coilover Variant 3 "inox-line", you can directly influence the handling and comfort with its precise click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers on the upper end of the piston rod will be adjusted via an integrated adjustment wheel or a twist-adjustment wheel which is included in the delivery content.

By increasing the rebound force via the adjustment wheel body movements are reduced. You will have more stability during high speed cornering. If you change for example the wheel / tire combination (approved by the car manufacturer) to larger wheels, then with a KW coilover Variant 3 "inox-line" you will be able to adjust the car's handling perfectly.
Print product description

High quality, individual and durable
The KW coilover Variant 3 "inox-line" kit and every single damper are subject to extensive quality tests during production to meet the high standards of our KW quality management. This is the only way we can meet our expectations to give up to five years warranty on our KW coilover Variant 3 "inox-line" when installed at one of our KW specialist dealer. KW coilover struts made of stainless steel are 100% rust-free and an unlimited life time.

Therefore the operation of the continuous lowering via the dirt-resistant KW trapezoid thread and the KW composite collar is also not affected after years. By the individual lowering with its continuous adjustment range, you can emphasize the sportiness of your vehicle visually. A feature that is very popular in the performance-oriented tuning scene.

Parts Certificate: Click Here

TECH SPECS

Rebound and compression damping adjustable damper technology
Stainless steel technology "inox-line"
Individual, continuous lowering
tested adjustment range
High quality components for a long life
Complete documentation for an easy handling
Adjustable rebound damping with 16 exact clicks
Adjustable compression damping with 12 exact clicks
Unique, independent from each other working damping force adjustment

Setup: The individual adjustable rebound- & compression damping of the KW Variant 3 "inox-line"
The KW coilover kit Variant 3 "inox-line" is the perfect accessory for performance-oriented drivers and tuning enthusiasts who put a great demand on their suspension. The separately rebound and compression damping adjustable dampers with their "well-thought-through" click adjustment allow a perfect setup. So it is easy to influence the steering behavior, directional stability, tire grip and handling characteristics when driving on the limit.

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Contact us for more information

AVAILABILITY

May take up to 8 weeks

KW Coilover Kit Clubsport 2-Way With Top Mounts | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

KW Coilover Kit Clubsport 2-Way With Top Mounts | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£2,448.95 GBP

KW Clubsport coilovers 2-way

The KW Clubsport coilovers utilize the uncompromising transfer of technology from the world of motorsports to track day/street driving.

The KW Clubsport coilovers combine KW's high-end racing technology with maintenance-free KW OEM components and part certificate.

This will provide you the ideal product to take full potential of your sports car during track days, sports car driving clinics, enthusiast drives on Grand Prix circuits and on tracks such as the Nürburgring Nordschleife.

Designed on the toughest race track in the world: The Nürburgring Nordschleife
The KW Clubsport coilovers provide the ability to adjust for different track surfaces, sharp turns and abrupt elevation changes. The KW Clubsport is in its home environment on the famous twists and turns of the 20.8 km long Nürburgring Nordschleife circuit.

As a supporting suspension manufacturer to numerous different racing series. KW had claimed 6 ADAC Zurich 24-hour victories within 10 years at the famous Nürburgring circuit and the ADAC GT Masters 2011 Championship. More then 70 race teams are equipped with KW coilover systems in the VLN Endurance Championship series. These race teams rely on KW's racing expertise and experience for their vehicle setup. This information is mirrored in the development of the KW Clubsport coilover systems.

The KW Clubsport 2-way and KW Clubsport 3-way (with separate reservoir) provides the user numerous adjustment settings. This allows to user to dial the suspension setup to his/hers driving style and to adjust or match the tire/wheel setup of the vehicle.

Rebound and compression dampening is independently adjustable by hand via the integrated click adjusters. Adjustable top mounts are optional on certain applications.

KW Clubsport coilovers 2-way Racing Technology
The rebound adjuster knob provides 16 precise clicks to personally dial in your desired vehicle setup. Thus allowing you the possibility to influence wheel/tire loads or take into concern chassis characteristics. Independent from rebound adjustment is the compression dampening, 12 precise adjustment clicks are provided to adjust the low-speed dampening. Most notably used to dial in wheel/tire setup.

These adjustment features allow the user to dial in vehicle weight, wheel/tire combinations, various road surfaces and environmental conditions.

Parts Certificate: Click Here

TECH SPECS

independently adjustable rebound and compression damping technology
stainless steel technology "inox-line"
continuous lowering
tested adjustment range
high-quality components for a long-term durability
adjustable rebound damping with 16 precise clicks
adjustable compression damping with 12 precise clicks
unique, independent damping force adjustment
optional spherical bearing aluminum top mounts

Setup: Application and damper settings
The KW Clubsport 2-way coilovers provide the ideal adjustment range for race tracks such as the Nürburgring Nordschleife and other racing circuits.

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Contact us for more information

AVAILABILITY

May take up to 8 weeks

ST suspension Coilovers XTA Galvanised Steel | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

ST suspension Coilovers XTA Galvanised Steel | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£1,388.95 GBP

ST Coilovers XTA galvanized steel (adjustable damping with top mounts)

For those who demand the absolute best performance comes the ST XTA coil over. The full driving behavior of your car can be adjusted using KW damper technology along with an adjustable aluminum uniball top mount for fine-tuning of the camber and caster!

Performance driving in mind
ST XTA coil overs feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminum adjustable top mount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.

Easy lowering adjustment
Like all ST coil overs the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coil overs due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.

KW Engineering: Exclusive for ST suspension
The high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.

TECH SPECS

Latest damping technology for maximum longevity
Reduced system friction for effective damping adjustment
Individual lowering within the tested adjustment range
Front and rear axle (when possible) with thread adjustment
Galvanized coil over struts with additional coating for an optimized corrosion protection
Complete solution with adjustable spring plate, race spring system and bumpers with dust protection
Aluminum adjustable uniball top mounts (when possible)
Scaled camber adjustment (optionally also caster), when possible
Externally adjustable damping

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Contact us for more information

AVAILABILITY

May take up to 8 weeks

ST Suspension Coilovers XA Galvanised Steel | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

ST Suspension Coilovers XA Galvanised Steel | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£1,182.95 GBP

ST Coilovers XA galvanized steel (with damping adjustment)

For drivers wanting more than just ride height adjustment comes the ST XA coilover. Developed alongside KW Automotive the ST XA allows individual adjustment of the damping to suit just about all your driving needs!

Perfect for sporty driving
ST XA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. Any vehicle fitted with ST XA coilovers will act much more agile and sporty compared to standard.

Easy lowering adjustment
Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.

KW Engineering: Exclusive for ST suspension
The high-quality ST XA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.

Parts Certificate: Click Here

TECH SPECS

External damper adjustment
Latest damping technology for maximum longevity
Reduced system friction for effective damping adjustment
Individual lowering within the tested adjustment range
Front and rear axle (when possible) with thread adjustment
Galvanized coilover struts with additional coating for an optimized corrosion protection
Complete solution with adjustable spring plate, race spring system and bumpers with dust protection

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Contact us for more information

AVAILABILITY

In stock. please allow 1-4 days for dispatch

Spoon Sports Progressive Lowering Springs | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£595.02 GBP

DESCRIPTION

The 10th generation Civic TypeR is equipped with an adaptive damper system that independently controls the damping force of each of the four wheels and instantaneously senses the driver's operation and vehicle condition and is precisely electronically controlled.

Spoon Sports has developed a lowering spring that can achieve even higher steering feel and control performance while maximizing its precise adaptive damper system.

Ride height is reduced by 20 mm in genuine ratio. Although the spring rate is increased by about 10%, the stiffness in the low-speed range is designed to be mild so you can enjoy a wide range of roads and circuits.

TECH SPEC

Ride height reduction - front -20mm, rear -20mm
Spring rate - front 5.0 kgf/mm, rear 4.9 kgf/mm

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton.

Contact us for more information

AVAILABILITY

In Stock. Allow 2-3 days for dispatch

ST Suspension Height-Adjustable Springs Kit | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

ST Suspension Height-Adjustable Springs Kit | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£540.95 GBP

For improved looks and more driving dynamics - in OEM quality.

ST height adjustable springs kits are a great alternative to conventional springs. You don’t have to be satisfied with a fixed lowering as you can adjust the height with the ST height adjuster even after the kit has been installed.

Your vehicle does not only get a more dynamic look with the ST height adjustable spring kit, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of an adaptive series suspension remain with our vehicle specific developed spring set up.

No more 30-30 or 40-40!
With conventional lowering springs you have to decide on the lowering from the beginning, but not with the ST height adjustable spring kits. Depending on the vehicle specific application you can change the lowering within the adjustment range with the threaded spring perch when the springs are already installed. For example, the ST height adjustable spring kit for an Audi S5 allows you to lower the car in the range of 5-35 mm. You will not have any difficulties to adjust the lowering when changing your wheel/tire combination.

OEM Quality
The from ST used high-quality springs made of chrome-silicon steel are at the ST coil over spring kits in their spring rates vehicle specific adjusted to the respective standard suspension dampers and wheel loads. At the development of the respective spring kits we consider that the spring rates will perfectly harmonize with the different damper characteristics of your adaptive series suspension.

With their high quality (surface) finish as well as the ST height adjuster, our ST height adjustable spring kits delivery content always includes the vehicle-specific bump stops with dust protection system to protect your standard suspension against tear & wear caused by spray and salt.

TECH SPECS

individual height adjustment of the standard suspension kit
adaptive damper control remains active
vehicle specific spring rates
better steering behavior
improved looks'

Setup - Application and adjustment
The ST height adjustable spring kits are suitable for drivers who want to lower their car and have the advantage of an individual adjustment range.

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Contact us for more information

AVAILABILITY

Can take up to 8 weeks

ST Suspension Lowering Sport Springs | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

ST Suspension Lowering Sport Springs | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£183.95 GBP

DESCRIPTION

ST SPORT SPRINGS

ST suspensions is proud to boast one of the largest applications for sport springs with more than 1000 vehicles now catered for. What's more, ST sport springs are one of the few lowering springs on the market that (in combination with the standard suspension) will greatly improve the driving behavious of a vehicle as well as its overall looks!

Performance and style for every car
Made from chrome silicon steel in a cold winding process, ST sport springs are multi-coated with a final expoy coating ensuring an OEM quality and finish. As a result, they withstand a variety of weather conditions all year round. Depending on the vehicle model, ST suspension sport springs will allow a typical lowering of around 20mm on the front axle and 15mm on the rear axle. Some vehicles can achieve a much greater lowering with the VW Golf Mk1 benefiting from 60mm on the front and rear axle!

Compared to standard suspension, ST sport springs lower the center of gravity to provide much better driving dynamics and handling. Furthermore, compression and rebound is also reduced which allows the car to drive more agile with reduced body roll.

The ideal spring rate for every car
The spring rates of ST sport springs have been designed to work perfectly with the standard dampers to ensure the driving dynamics are improved and ultimately safe. Vehicle weight, wheel loads and the level of lowering has a huge impact on the rebound and compression of a vehicle so it's essential this is not compromised. Depending on the level of lowering (for example 20mm, 30mm or 40mm), ST sport springs have different spring rates that harmonize with the standard shock absorbers. Put simply the more lowering, the higher the spring rate.

Great variety
ST sport springs aren't just available for new vehicles such as the Audi A7 Sportback or Mercedes-Benz E-Class: even classic and rare models such as the BMW M30 and Mk1 Golf will find the perfect sport springs in the ST suspension product range!

PARTS CERTIFICATE HERE

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Contact us for more information

AVAILABILITY

May take up to 24 Working days from production

Eibach Pro-Kit Performance Springs | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£279.50 GBP

EIBACH Pro Spring Kit. Sport suspension springs that can be used in conjunction with factory OE dampers and other types of after-market shocks, especially with the Eibach Pro Dampers. You will sense the sporty road performance of your vehicle when changing direction and when pulling through curves at high speeds while not sacrificing any comfort. The kit offers 25mm lowering all around.

Based on motorsport developments and a myriad of test series in Eibach’s own test development centre, Pro kits are designed in accordance with the latest insights of driving dynamics. The Pro kit features a balanced relationship between sport looks, more safety, and added performance while offering increased driving pleasure at the same time. Ideal if you want to lower your car and still retain a good level of driving comfort. Supplied as a complete car set.

Lead time: September 2021

Eibach Anti-Roll Kit 32mm Front Anti-Roll Bar | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£245.41 GBP

DESCRIPTION

Complete your performance suspension upgrade with the Eibach ANTI-ROLL-KIT performance sway bars. While the Eibach Pro-Kit and Sportline performance spring kits are regarded as the primary suspension performance enhancement, the Eibach ANTI-ROLL-KIT sway bars substantially reduce body-roll through increased design stiffness over your vehicles stock bars. The impressive results are increased balance, handling and cornering grip in all performance-driving situations.

TECH SPECS

32mm diameter
Hollow, tubular steel

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:

Fitting Time -
Required Additional Items/Services - No additional items or services needed.
Dream Automotive Recommends - No additional recommendations.

AVAILABILITY

3-5 Days

Eibach Anti-Roll Kit 25mm Rear Anti-Roll Bar | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

Eibach Anti-Roll Kit 25mm Rear Anti-Roll Bar | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£199.95 GBP

DESCRIPTION

Complete your performance suspension upgrade with the Eibach ANTI-ROLL-KIT performance sway bars. While the Eibach Pro-Kit and Sportline performance spring kits are regarded as the primary suspension performance enhancement, the Eibach ANTI-ROLL-KIT sway bars substantially reduce body-roll through increased design stiffness over your vehicles stock bars. The impressive results are increased balance, handling and cornering grip in all performance-driving situations.

TECH SPECS

25mm diameter
2-Way Adjustable
Hollow, tubular steel

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:

Fitting Time -
Required Additional Items/Services - No additional items or services needed.
Dream Automotive Recommends - No additional recommendations.

AVAILABILITY

3-5 Days

Eibach Anti-Roll-Kit 32mm Front/25mm Rear | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£375.48 GBP

Complete your suspension upgrade with an Eibach Anti-Roll-Kit. While our Pro-Kit and Sportline spring sets are regarded as the primary suspension enhancement components, the Eibach Anti-Roll-Kit allows critical fine-tuning of your cars handling characteristics.

Anti-Roll-Kits reduce body roll through increased design stiffness over stock bars. The result: increased handling and cornering grip in any performance-driving situation.

Manufactured from cold-formed steel alloy for precision performance, and finished with a long lasting red powder coat finish, the Anti-Roll-Kit comes complete with all mounting hardware

Cusco Front Anti-Roll Bar | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

Cusco Front Anti-Roll Bar | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£326.11 GBP

DESCRIPTION

Cusco anti-sway bars replace the factory anti-sway bars (if equipped) and use the factory mounting locations. A Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. The larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.

TECH SPECS

The bar is 30mm vs the OEM which is 23mm, this offers an increase in rigidity of approx. 130%

WHAT'S IN THE BOX

The item is designed to replace the standard item and includes all necessary hardware.

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:

Fitting Cost -
Fitting Time -
Required Additional Items/Services - No additional items or services needed.
Dream Automotive Recommends - No additional recommendations.

AVAILABILITY

3-5 Days

Cusco Rear Anti-Roll Bar | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

Cusco Rear Anti-Roll Bar | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£285.34 GBP

DESCRIPTION

Cusco anti-sway bars replace the factory anti-sway bars (if equipped) and use the factory mounting locations. A Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. The larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.

TECH SPECS

The bar is 22mm, this offers an increase in rigidity of approx. 143%

WHAT'S IN THE BOX

The item is designed to replace the standard item and includes all necessary hardware.

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:

Fitting Cost -
Fitting Time -
Required Additional Items/Services - No additional items or services needed.
Dream Automotive Recommends - No additional recommendations.

AVAILABILITY

3-5 Days

Hardrace Front Sway Bar 28MM 3PCS/SET | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

Hardrace Front Sway Bar 28MM 3PCS/SET | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£249.71 GBP

DESCRIPTION

Sway Bar affects the handling and the car_s oversteer and understeer. It ties the lower suspension links together across the front or back, will keep your car flat in turns instead of leaning over to one side. Hardrace sway bars provide better control especially at high speeds cornering. Designed for OE direct replacement. Hollow internal structure. Heat-treated, adjustable type (2 holes). Correction of under or oversteer. Improve more grip and better handling. Increased stability while during high-speed cornering

TECH SPECS

Designed for OE direct replacement
Hollow internal structure
Heat-treated, adjustable type (2 holes)
Correction of under or oversteer
Improve more grip and better handling
Increased stability while during high-speed cornering

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Direct Fitment

AVAILABILITY

3-7 Working days

Hardrace Rear Sway Bar 22MM 3PCS/SET | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£178.43 GBP

DESCRIPTION

Sway Bar affects the handling and the car_s oversteer and understeer. It ties the lower suspension links together across the front or back, will keep your car flat in turns instead of leaning over to one side. Hardrace sway bars provide better control especially at high speeds cornering. Designed for OE direct replacement. Hollow internal structure. Heat-treated. Correction of under or oversteer. Improve more grip and better handling. Increased stability while during high-speed cornering

TECH SPECS

Enhance body rigidity
Reduce body roll
Providing excellent steering response
Improve car handling and stability

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+

AVAILABILITY

5-10 DAYS

KW Clubsport Top Mounts FA | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

KW Clubsport Top Mounts FA | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£230.95 GBP

KW Clubsport top mounts FA (with camber adjustment)

KW Clubsport aluminum unibal top mounts have been transferred from motorsports to the street.

We also offer adjustable top mounts made from high tensile aluminum alloy for our KW Clubsport kits. Camber and caster (optional) adjustments are available on certain applications.

Designed for the toughest race track in the world: the Nürburgring Nordschleife

A special KW sealing system avoids an intrusion of dirt and water into the free of play and preloaded unibal bearings. Furthermore axial bearings allow rotation of springs at McPherson struts.

Scaled camber adjustment (optionally caster adjustment)
Sealed and preloaded spherical bearing
Axial bearings allow rotation of springs at McPherston struts
Made of tool steel (100Cr6): 58 to 64 HRC - hard chrome plated
PTFE surface inlay, stainless steel outer ring (X20Cr13)

TECH SPEC

Only be used in combination with KW clubsport coilover kit

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Contact us for more information

AVAILABILITY

May take up to 12 Working days from production

Spoon Sports Rigid Collar Kit | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

Spoon Sports Rigid Collar Kit | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£220.00 GBP

DESCRIPTION

Rigid Collars are simple in their shape but clever in their design.

Rigid Collars are made from a secret blend of space materials which ensures they mount perfectly flat between the chassis and subframe taking up any imperfection in the mounting surfaces.

Rigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer.

This is achieved by the collar material, the tapered design and extremely high manufacturing tolerances.

AVAILABILITY

7- 14 Days

HKS Suspension Error Canceller | Honda Civic Si/Type R | FC1/FC3/FK8 2.0T K20C1 | 2017+

HKS Suspension Error Canceller | Honda Civic Si/Type R | FC1/FC3/FK8 2.0T K20C1 | 2017+

£432.00 GBP

DESCRIPTION

SEC Type H is a device to cancel the error from the OEM factory variable damper system shown in the dashboard display.
This device is designed to erase the error detected when a stock damper is replaced with an aftermarket damper.
This device is an optional part of HKS Hipermax suspension kit.
The Suspension Error Canceler hides the error of the variable damper system shown in the dashboard display.

TECH SPECS

SEC Type H is able to work even after upgrading the variable damper system control unit.
With the provided installation harness, no wiring modification is required to install this unit.

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+
Honda Civic Si | FC1/FC3 1.5T L15B7 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:

Fitting Cost - £30
Fitting Time - 0.5 Hours
Required Additional Items/Services - No additional items or services needed.
Dream Automotive Recommends - For all aftermarket damper upgrades.

Connect the main unit between the variable damper system control unit and the vehicle harness using the SEC harness. Mount the main unit of SEC Type H using a double-sided tape and tie wrap.

(1) The variable damper system control unit is located inside the interior of the back seat's left side.		(2) Disconnect the connector. Install the harness between the vehicle harness and unit.		(3) Secure the SEC unit and harness using a double-sided tape and tie wrap.

The error code that occurs in the variable damper system control unit cannot be deleted. Fault diagnosis equipment may not work when SEC is installed.

AVAILABILITY

3-5 Days

Öhlins EDC Cancellation Kit (sample image)

Öhlins EDC Cancellation Kit | Honda Civic Type R | FK8 | 2.0T K20C1 | 2017+

£271.00 GBP

DESCRIPTION

The Öhlins EDC Cancellation Kit for Road & Track deactivates control lamps and error reports when electronically adjustable OEM suspension is replaced by a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed

WHAT'S IN THE BOX

1 Cancellation Kit
Installation material (if needed)
Mounting instructions

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Here are the important things you need to know:

AVAILABILITY

Please contact us for lead time

KW Cancellation Kit for Electronic Damping | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£288.95 GBP

Avoids error messages when changing the suspension
Only the standard damper control is shut down and at the same time it prevents error messages
Functions of the control unit remain fully
Can also be used for other manufacturers and OE aftermarket suspensions separately

COMPATIBLE VEHICLES

Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Contact us for more information

AVAILABILITY

Please allow 3-5 for dispatch

Dream Automotive Bolt-In Roll Cage | Honda Civic Type R | FK8 2.0T K20C1 | 2017+

£895.00 GBP

Colour

Black White Silver Red

Material

CDS T45

Cantidad

Built to our own exact requirements, our bolt in half cage will not only keep you safe in the event of an accident but looks good at the same time.

Produced from Coldrawn seemless mild steel or T45 alloy/steel 45mm tubing featuring a double x brace with gusseted centers, along with built in harness bar, our cage allows full slide on both front seats to accommodate drivers of all sizes.

Piece design using billet 2 bolt joiners attaching the 38mm infill rear section to the main 45mm front hoop.

Rear seat belts will be removed in order to fit the cage, small amount of trimming will be needed to one trim either side of the car. Templates and fittings supplied.

you will be required to drill a few holes in order to mount the cage through the floor and into the rear section around the seat belts.

Lead time: 4/6 weeks