After many months of extensive research, we are pleased to offer our Dream 3" Valved exhaust system.

Our system has been developed with a few goals in mind a Unique design, distinctive sound and strong performance. We have set out to develop an exhaust system based around a decated car. Most owners will be aware the larger gain in power would be from replacing the downpipe installed onto the K20C1 engine found in the FK8 Civic Type R.

With Trackday noise limits in place across the UK we have certain limits we need to obtain.

With the want for utilising an aftermarket downpipe during trackday conditions this would be the basis for our development to start from.

Utilising 3" 76mm Aerospace-grade, non-magnetic stainless steel pipework used for the entire system, we have smoothed restriction points resulting in performance gains that can be dyno proven.

UK built, hand-finished welds and precision jigged construction, results in an exhaust that fits as per OEM, but with a gain in sound and performance.

----------

The system is offered in a few options of sound level

ROAD - with front silencer - with mid silencer - with valved rear silencer (Best for decatted cars) 92/93Db - decatted

TRACK - NO front silencer - with mid silencer - with valved rear silencer  (Best for decatted cars) 95/96Db - decatted

RACE - with front silencer - NO mid silencer - with valved rear silencer (Best for standard downpipe) 98/99Db - decatted

RACE+ - NO front silencer - NO mid silencer - with valved rear silencer (for Standard downpipe only)

We have incorporated the use of a valve on our system to allow for adjustments of the tone and volume, allowing for any further variations in Db. Interchangeable silencers will allow you to upgrade your system to the next level at any point. All systems will include the front pipe situated between downpipe and steering rack area. 

The system is offered with x2 tailpipe options of Brushed or Polished stainless steel.

TECH SPECS

• Direct OEM Fitment
• ALL VALVED SYSTEMS AS STANDARD

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Contact us for more information

AVAILABILITY

Road + Track systems in stock (Race/Race+ 1 week from order)

A premium muffler with the titanium tail tip

Maintaining its full straight structure (the signature of J’s Racing exhausts), this is a premium semi-titanium exhaust with a stainless body and titanium tail.

The main pipe and the silencer are made of C304 stainless. Manufactured by the use of a three-dimensional bender, the exhaust pipe has beautiful curves which produce super smooth airflow with the optimal exhaust speed.  The popular dolphin tail boasts 114 mm in diameter for a very impressive view. 

Utilizing the TIG welding this exhaust is made by an experienced craftsman one by one with the quality of the utmost importance.

In order to achieve both an excellent boost response and a superb acceleration at a higher rev range,  the main pipes are designed as 70 mm – 60mm x2 with only one silencer.   The heavy low pitched exhaust note from the turbo will excite you for spirited driving. 

TECH SPEC

• Material: SUS304, titanium alloy
• Weight: 14.2kg ※Pure 18.2kg
• Configuration: 70φ → 70φ * 2 → 114φ * 2
• Main pipe thickness 1.2mm Silencer, tail thickness: 1mm
• Since the silencer part has a punching structure containing glass wool, it has a more muffling effect than 70RR.
• Complete vehicle-specific design

AVAILABILITY

1-2 months from order

Check out the video below for sound clips...

AVAILABILITY 

2-10 DAYS

DESCRIPTION

Martelius's unique sound control solutions in this exhaust allow for zero highway drone with identical noise levels as standard into the cabin. In hard driving, the sound is significantly more aggressive than OEM. If you use a decat or sport-cat downpipe, the optional extra silencer is highly recommended for the best sounds.

FITTING DETAILS

DREAM offers in-house fitting on all products at our workshop in Luton.

Contact us for more details

AVAILABILITY

In stock

DESCRIPTION

Established in 1931, Fujitsubo has been manufacturing exhausts in Japan for many years, providing them with the sort of experience that's required to craft some of the best exhausts on the market. Manufactured exclusively in Japan, Fujitsubo exhausts are a JDM brand in the purest sense and have been widely recognised as being some of the highest quality systems available on the market and with good reason

Authorize RM is Fujitsubo’s latest generation of exhaust, a performance focussed system with an emphasis on saving weight, whilst looking good and sounding distinctive.

Fujitsubo’s Authorize RM+c for the FK8 Civic Type R is a lightweight full titanium system, offering the sort of unique metallic exhaust note that is only possible from a ti system. Along with Fujitsubo’s trademark high-quality fit and finish, the twin exit back box includes real carbon garnishes. A comprehensive fitting kit is also included to ensure easy, trouble-free installation.

TECH SPECS

• Titanium construction
• Real Carbon exhaust tip garnishes
• Fitting kit included
• 2.75"-2.4" pipe diameter
• 4.64" exhaust tip diameter

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Here are the important things you need to know:

• Fitting Time - 1 Hour
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - No additional recommendations.

AVAILABILITY

Lead Time Varies

DESCRIPTION

Milltek’s technicians have completed their redesign of the OEM exhaust system, doing away with the various pipe sizes and "pinch points" to create a much smoother and better flowing design. Milltek's development vehicle has been thoroughly tested on the road, race track and dyno to ensure it meets the brand ethos - performance without compromise. 

The system comes in three different configurations to suit a wide range of intended uses: EC-Approved (a requirement for sale in some countries around the World), Road+ and Race. 

There are five different Tip options available, Polished, Cerakote Black, Carbon, Titanium and Burnt Titanium. 

As with all Milltek systems, quality is the watchword throughout. Aerospace-grade, non-magnetic stainless steel is used for the entire system (including clamps), with hand-finished welds and precision jigged construction. The result is an exhaust that fits as per OEM, but with a longevity and soundtrack that is anything but 

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

Contact us for information.

AVAILABILITY

Stock may vary. Please allow 1-3 days for dispatch. 

DESCRIPTION

Gemini R400 is the newest in the line up of high performance cat-back exhaust systems by Invidia. Works with OEM/factory rear bumper and features the all-new single slant cut titanium tips with engraved Invidia logo.

The triple tip Invidia Gemini R400 exhaust system features a single-layer style tip exhaust for a robust and aggressive look. The R400 features independent muffler resonators for each tip to reduce weight and provide a deeper exhaust tone. 

In order to create a true 3" cat-back, Invidia decided to include the down-pipe/mid-pipe/front-pipe with this system. Meaning this system connects all the way up to the primary down-pipe making this a true 3" exhaust system!

Optional de-cat & race cat are also available.

TECH SPECS

Cat-Back Exhaust System

• SUS304 stainless steel 3" (80mm OD) mandrel-bent construction.

Optional Race Cat

• Full stainless steel cast bellmouth, for optimum performance (ultra-smooth finish).
• 3" (80mm OD) tubing, works great with 3" cat-back systems (will still fit the OEM/ factory system).
• 200 CPI metal RACE catalyst 
• Bolts to factory mounting points and retains factory heatshield, hassle-free installation.

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:

• Fitting Cost - Cat-back exhaust - £84 / Race cat - £252
• Fitting Time - 1 hour / 3 hours
• Required Additional Items/Services - No additional items or services are needed.
• Dream Automotive Recommends - No additional recommendations.

AVAILABILITY

7-10 Days

DESCRIPTION

Overwhelming Low Exhaust Pressure - 50％ of Original Pressure φ75 large diameter pipe and full straight structure reduce the exhaust pressure to 50% of the stock.

This significant exhaust pressure reduction enables the turbine to run smoothly from low RPM range, which results in the engine output increase in an entire speed range.

Also, this pressure reduction effect is enhanced as the tuning level becomes more advanced; the engine output can be increased to 540ps without engine power-loss.

TECH SPECS

※ Exhaust level at idle measured by the US method.

*1: About silencer shell type of Silent Hi-Power
TYPE-S/Oval silencer for noise reduction.
TYPE-H/Round silencer for performance.

*2: Main material in the component figure.

 ： SUS304/High quality stainless steel.
 ： SUH409/Stainless steel commonly used for stock exhaust.

*3: About centre pipe
Diameter of centre pipe is the portion that has the largest diameter. (Excluding silencer and tip.) It is the condition with stock suspension.

*4: Minimum road clearance between HKS muffler (Any parts included in the kit) and road surface. Therefore, it may be different from actual road clearance of the vehicle.

The data is basically the condition with stock suspension. However, please understand that some items have data with low down spring or ride height adjustable suspension kit. 

Caution: Hook, bracket, stay may be changed without prior notice.

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton

AVAILABILITY

2-4 weeks

The CIVIC TYPE R (FK8) has a maximum output of 320ps and a maximum torque of 400Nm even in the normal state, but it aims to improve the output in the entire range without impairing the high torque and high response engine performance in the low to medium rev range, which are also its features. , I have repeated many exhaust tests.

The main pipe uses SUS304 material Φ70, and the tail adopts Φ70 finisher for Φ145 cannonball type dual silencer which can be said to be a symbol of SPOON N1 muffler. By eliminating the throttle at each flange connection and making it a straight structure, the exhaust efficiency has been improved to the utmost limit and a high-quality N1 sound has been achieved.

SPOON has been developing the ECU in parallel with the development of the exhaust, but in order to further increase the output and torque with ECU tunes such as boost up, it is essential to change from the front pipe, and the front pipe with a pipe diameter of Φ70 Was made as a set.

TECH SPEC

• Obtained JQR certification. Compliant with safety standards
• Proximity exhaust noise: 91db
• Acceleration running noise: 78db

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

AVAILABILITY

Scorpion's R&D technicians developed a high flowing T304 63.5mm Stainless Steel cat-back exhaust system which has much greater flow rates in comparison with the  o.e exhaust. 

For even greater power enhancement the R&D team also developed a high flowing 70mm turbo down pipe which is fully interchangeable with the Scorpion and o.e system. Both 200 cell sports catalyst and an extremely high flowing de-cat version of the down pipe are available.

Photos are of development systems only 

DESCRIPTION

"Lightweight" Concept
The weight of this SPEC-L is approximately 11.6kg. Compared with 17.5kg stock's weight, it is approximately -6kg (34%) less than the stock.

Transform "Standard Bullet-shaped Silencer" to Spartan Impression 
Standard bullet-shaped silencers were completely redefined. Impressive carbon exhaust tips and its lightweight provide higher performance and spartan appearance.

TECH SPECS

※ Exhaust level at idle. Measured by the US method.

*1: About silencer shell type of Silent Hi-Power
TYPE-S/Oval silencer for noise reduction.
TYPE-H/Round silencer for performance.

*2: Main material in the component figure.

 ： SUS304/High quality stainless steel.
 ： SUH409/Stainless steel commonly used for stock exhaust.

*3: About center pipe
Diameter of center pipe is the portion that has the largest diameter. (Excluding silencer and tip.) It is the condition with stock suspension.

*4: Minimum road clearance between HKS muffler (Any parts included in the kit) and road surface. Therefore, it may be different from actual road clearance of the vehicle.
The data is basically the condition with stock suspension. However, please understand that some items have data with low down spring or ride height adjustable suspension kit. 

Caution: Hook, bracket, stay may be changed without prior notice.

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton.

AVAILABILITY

3-5 Days

Frequency Intelligent Valvetronic Exhaust System technology offers cutting-edge intelligent ECU exhaust control valve, with an emphasis on the optimization of both acoustics and performance. It is a testament to their philosophy of the ultimate union of comfort and performance experience for the driver and passengers. 

When the valves are fully open for maximum flow and power, it creates an exotic tone and allows for high performance. When the valves are closed, volume is reduced for a more low-profile comfortable drive. With the latest technology, just one click on the remote control will setup any rpm to automatic mode.

The automatic mode enables the system to detect the engine RPM to intelligently switch comfort/racing exhaust profiles. Users can also opt to simply switch valve on/off mode as desired by remote control when driving. 
Furthermore, the muffler internals are individually designed and fabricated for each car model, a perfect testament of insistence on producing the best customized products in the market with Valvetronic technology for ultimate performance. Each product has its own unique sound acoustics and performance, all to add the "extra" in extraordinary.

Additional Shipping charges apply, please ask for more details 

More details coming soon 

• 3 Functional Rear Exits
• Carbon Fiber Tips
• Includes Optional Front Resonator Delete Kit
• Increased Horsepower and Torque
• Includes all necessary hardware (connects via V-Band system)
• Lifetime Construction Warranty
• 2.5" Stainless Steel 

TRIPLE CENTER REAR EXIT

The MagnaFlow Competition Series Exhaust Systems are designed for those seeking maximum performance, reduced mass and an aggressive exhaust note that demands attention. The Carbon Fiber tips enhance the impact of the system with a unique performance style. These systems may not comply with all local or federal noise requirements. • All Mandrel Bent Tubing • 409 Stainless Steel Construction • Carbon Fiber Tips • Increased Horsepower and Torque • Lifetime Stainless Warranty; No Warranty On Carbon Fiber • Made in USA

DESCRIPTION

Gemini R400 Full Titanium is the newest in the line up of high performance cat-back exhaust systems by Invidia. Works with OEM/factory rear bumper and features the all-new single slant cut titanium tips with engraved Invidia logo.

The triple tip Invidia Gemini R400 exhaust system features a single layer style tip exhaust for a robust and aggressive look. The R400 features independent muffler resonators for each tip to reduce weight and provide a deeper exhaust tone. 

In order to create a true 3" cat-back, Invidia decided to include the down-pipe/mid-pipe/front-pipe with this system. Meaning this system connects all the way up to the primary down-pipe making this a true 3" exhaust system!

Optional de-cat & race cat also available.

TECH SPECS

Cat-Back Exhaust System

• Full Titanium mandrel bend construction 
• Lightweight 11.90kg (including front pipe) vs stock 17.8kg without front pipe
• 80mm OD diameter
• Suitable for 500+ HP output

Optional Race Cat

• Full stainless steel cast bellmouth, for optimum performance (ultra smooth finish).
• 3" (80mm OD) tubing, works great with 3" cat-back systems (will still fit the OEM/ factory system).
• 200 CPI metal RACE catalyst 
• Bolts to factory mounting points and retains factory heatshield, hassle-free installation.

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Bushey, Hertfordshire. Here are the important things you need to know:

• Fitting Cost - £
• Fitting Time - Hours
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - No additional recommendations.

AVAILABILITY

7-10 Days