1 3

Hondata K-Pro 4 | Honda K Series

£729.50 GBP
inkl. MwSt. Versand wird beim Checkout berechnet
2 auf Lager

The K-Series Programmable ECU (K-Pro) consists of a hardware modification to any K-Series ECU, plus Windows software which allows you to re-program the ECU and datalog sensors.

TECH SPECS

  • Fits inside the ECU
  • Designed and assembled in USA
  • USB connection for speed and compatibility
  • KManager Windows based software for parameter & table editing, calibration uploading and datalogging.
  • Many built in calibrations for common engine combinations
  • Built in datalogging to a laptop
  • On board datalogging memory (8 MB memory, 10-215 minutes datalogging)
  • Adjustment for different sized injectors, with overall fuel trim.
  • Configurable for any MAP sensor (to 5 Bar and above)
  • TPS based table lookup for ITBs
  • Engine protection from lean air fuel ratios, over boost and low oil/fuel pressure.
  • Expanded fuel and ignition tables, both in rpm and load, to 60 lbs boost and 11,000 rpm (these are not the upper limits)
  • Launch control with anti-lag
  • Three multi purpose outputs for nitrous control or similar.
  • Supports lambda tracing from the stock wideband o2 or aftermarket wideband.
  • PWM output for boost control
  • Bluetooth support and Hondata Mobile app.
  • Ethanol sensor input for flex fuel capability.
  • Alternate speed sensor input.
  • Dash output serial & CAN streams.
  • Live tuning and auto tune.

KManager editing software features:

  • High and low speed 16 x 20 ignition and fuel tables at multiple cam angles for correct VTEC and VTC tuning.
  • Injector size fuel trim
  • Fuel trim for starting, throttle tip in and individual cylinder trim
  • Rev limiter with fuel cut
  • Launch control with anti-lag
  • Adjustable VTEC window with load and throttle control
  • Adjustable idle speed
  • MAP sensor type and calibration
  • Adjustable boost cut with hot and cold settings
  • Closed loop control
  • Air temperature compensation
  • Fuel and ignition correction based on gear
  • Closed loop
  • Three general purpose outputs for nitrous control, quad boost control or similar
  • On board datalogging trigger conditions

    COMPATIBLE VEHICLES

    • Civic Si 2002-2005
    • Civic Type R 2001-2005
    • RSX Type S 2002-2004
    • RSX Base 2002-2004
    • Integra Type R 2002-2006

      FITTING DETAILS

      Dream Automotive offers in-house fitting on all products at our workshop in Luton. Here are the important things you need to know:

      • Required Additional Items/Services - Live Dyno Tuning at Dream Automotive is also available.
      • Dream Automotive Recommends - No additional recommendations.

      Improper installation and/or adjustment of this product can result in major engine and/or vehicle damage.

      It is the responsibility of the installer and/or user of this product to ensure that it is used in compliance with all applicable local laws and regulations. If this product was purchased in error, do not install and/or use it. The purchaser must arrange to return the product(s) for a full refund.

      Dream Automotive accepts no responsibility for engine and/or vehicle damage, personal injury, or invalidation of any manufacturer warranty resulting from the installation and/or adjustment of this product.

      FAQ 

      Q. Which ECU's are compatible with this K-Pro?
      A. PRB (A01-A12 & 305), PND (A01-A09), PNF, PRA, PRC, PRD, PPA

      AVAILABILITY

      Stock Item