This is a step-by-step guide to installing the Dream Automotive wire tow loop & bracket to show you everything you need to be up and running.
If you require further assistance installing this product please get it in contact.
Step 1
Remove clips and fasteners from the front bumper and remove the bumper.
Step 2
The tow hook can be installed on the right or left hand size of the car. Located the mounting hole under the crash bar. The one existing hole allows for the bracket to be mounted and a marking to be made for the second mounting hole. Drill this hole using a 9mm drill bit.
Step 3
Using the supplied hardware secure the bracket to the frame and the tow hook to the bracket.
Step 4
Cut a small cross section out of grill using a stanley blade to allow the strap to pass through the bumper.
Step 5
Thread the tow hook through the bumper and reinstall the bumper.
