ACL RACE Conrod Bearing Set | Honda Civic Type R | FK2/FK8 2.0T K20C1 | 2015+
€68,95 EUR
/
1 in stock
Pickup available at Dream Automotive
Normalmente pronto em 24 horas
DESCRIPTION
Designed to withstand higher RPM conditions, ACL Race Series Engine Bearings are available for many of the popular 4, 6 & 8 cylinder applications and features:
- HIGH STRENGTH OVERLAY PLATE with reduced thickness for improved fatigue properties
- HARDENED STEEL BACKS on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing.
- INCREASED CRUSH for improved bearing retention
- ELIMINATION OF FLASH PLATING on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and their housing.
- INCREASED ECCENTRICITY to compensate for bore distortion at high rpm and to assist in the formation of hydrodynamic oil films.
- 3/4 GROOVED MAIN BEARINGS to optimize bearing load carrying surface area and oil flow to the conrod bearings.
- TIGHT CONSISTENT WALL TOLERANCES to help you maintain consistent clearances.
- ENLARGED ID CHAMFERS on bearing edges where required to accommodate large fillet radius on performance crankshafts.
| Sizes | STD, .025, .25 |
| Oil Clearance | Standard |
| Half Type | Identical Halves |
| Material | Tri-metal Hardened steel backs |
| Min. Std Shaft Size | 1.889in / 47.98mm |
| Max. Std Shaft Size | 1.8898in / 48mm |
| Min. Std Tunnel Size | 2.008in / 51.004mm |
| Max. Std Tunnel Size | 2.0088in / 51.024mm |
| Max Wall at Crown | 0.0591in / 1.5mm |
| Max Overall Length | 0.6063in / 15.40mm |
| Weight | 0.12 |
| Notes | 0 |
TECH SPEC
- High-performance Trimetal engine bearings
- Designed to withstand higher RPM conditions
- High-strength overlay plate with reduced thickness for improved fatigue properties
WHAT'S IN THE BOX
- 1x FULL SET
COMPATIBLE VEHICLES
- Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
- Honda Civic Type R | FK8 2.0T K20C1 | 2017+
- Ariel Atom 4 | 2.0T K20C1 | 2019+
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton.
Contact us for more information
AVAILABILITY
STD - IN STOCK
0.025 & 0.25 - 1-2 WEEKS