{"product_id":"hybrid-racing-formula-cold-air-intake-honda-civic-type-r-fk8-2-0t-k20c1-2017-21","title":"Hybrid Racing | Formula Cold Air Intake | Honda Civic Type R | FK8 2.0T K20C1 | 2017-21","description":"\u003cp\u003eHybrid Racing started with a simple question: if they could build everything they wanted into one FK8 intake, what would it look like? It'd make more power through the whole pull, wake up the turbo and induction sound when you get on it, look like it belonged in the engine bay, put the filter within easy reach, and keep up with you as you kept modifying your Civic Type R.\u003c\/p\u003e\n\u003cp\u003eThree MAF housings, seven velocity stacks, several filters, flow-bench testing, 16 material and shielding samples, and 65 dyno pulls later, Hybrid Racing had their answer: the Formula Intake. It's Hybrid formula for what they think is the best intake you can bolt to an FK8.\u003c\/p\u003e\n\u003cp\u003eThe first thing most people want to know about an intake is how much power it makes, so let's answer that head-on. Here are three comparisons we ran on the same 2019 FK8, from the most dramatic result to the most true-to-life.\u003c\/p\u003e\n\u003ch4\u003eJust Swap It: Factory ECU Untouched\u003c\/h4\u003e\n\u003cp\u003eHybrid Racing bolted on the Formula 76mm Street and changed nothing else. Power jumped from 270.2 to 300.2 wheel horsepower, with no check engine light and no knock correction anywhere in the log. It isn't 30 horsepower from airflow alone, since the new MAF signal also shifted the ECU's fueling and load math. Even so, it shows how hard the car responded to the swap.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2218\/5701\/files\/comparison-1-factory-ecu-j1-vs-j4_a432440a-5ff7-4aa8-ad0a-73da08d07517.png?v=1784642107\" alt=\"Dyno graph comparing the factory airbox and the Formula 76mm Street intake on the untouched FK8 ECU\"\u003e\u003c\/p\u003e\n\u003ch4\u003eAdd FlashPro: Same Base Map, Both Intakes\u003c\/h4\u003e\n\u003cp\u003eNext Hybrid Racing added Hondata FlashPro and ran both intakes on the same Base Map, before loading any Formula-specific MAF scaling. The curves stayed close through the middle of the pull, then the Formula pulled ahead toward redline. It's a useful real-world middle step, not the final tuned comparison.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2218\/5701\/files\/comparison-2-base-map-j2s-vs-j5_0bb6bc0d-bace-4c69-8c36-eec82ae175a3.png?v=1784642110\" alt=\"Dyno graph comparing the factory airbox and the Formula 76mm Street on the same Hondata FlashPro Base Map\"\u003e\u003c\/p\u003e\n\u003ch4\u003eTuned Right: The Honest Like-For-Like\u003c\/h4\u003e\n\u003cp\u003eFinally, Hyrbid Racing set the MAF scaling correctly for each intake and tuned the car around each setup. This is the closest apples-to-apples comparison you'll find, and it's the number to expect on a tuned FK8. The Formula averaged about 7 more wheel horsepower and 8 more lb-ft of torque from 2,500 to 6,800 rpm. More telling than the peak, it made more usable power through most of the pull instead of just touching a higher number up top.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2218\/5701\/files\/comparison-3-custom-calibration-j3h-vs-j6_4cf698a6-3251-47f2-a237-9489a0353341.png?v=1784642113\" alt=\"Dyno graph comparing the factory airbox and the Formula 76mm Street with a custom tune and matched MAF scaling\"\u003e\u003c\/p\u003e\n\u003cp\u003eThat's the short answer. Our complete FK8 Formula Intake dyno test lays all six runs side by side and digs into the MAF signal, the fuel correction, the area under each curve, the little calibration details, and our full test method, with interactive graphs you can line up and race against each other.\u003c\/p\u003e\n\u003ch4\u003eThe Short Version\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAbout 7 more wheel horsepower and 8 more lb-ft of torque on average from 2,500 to 6,800 rpm in the matched Custom Tune comparison\u003c\/li\u003e\n\u003cli\u003e76mm Street housing for most stock and lightly modified FK8s\u003c\/li\u003e\n\u003cli\u003e89mm Race housing for higher-power builds that need more MAF sensor range\u003c\/li\u003e\n\u003cli\u003eEnclosed XLPE airbox with upper and lower outside-air feeds\u003c\/li\u003e\n\u003cli\u003eMore turbo, induction, and recirculating-valve sound when you're on the throttle\u003c\/li\u003e\n\u003cli\u003eFilter lifts out through the lid without pulling the airbox\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points with no cutting, drilling, or front-bumper removal\u003c\/li\u003e\n\u003cli\u003eWorks with the factory turbo inlet pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhich MAF Housing Should You Run?\u003c\/h4\u003e\n\u003cp\u003eThe Formula comes in two versions. Go with the 76mm Street for a stock or lightly modified FK8, whether your car still has the OEM Honda ECU or you're already on FlashPro. You can install it without tuning, though we strongly recommend FlashPro or another solution that can set the MAF scaling correctly. Go with the 89mm Race for a higher-power build that needs more MAF sensor range so your ECU and tuner keep measuring airflow accurately. Both versions use the same factory Honda MAF sensor, and only the housing and its matching velocity stack change.\u003c\/p\u003e\n\u003ch4\u003e76mm Street\u003c\/h4\u003e\n\u003cp\u003eThe 76mm Street is the right call for most stock and lightly modified FK8s. It's the housing we used for the comparisons above, and it runs on the factory ECU. If your car's on FlashPro, load the correct Formula MAF scaling so the ECU reads the new intake path properly.\u003c\/p\u003e\n\u003ch4\u003e89mm Race\u003c\/h4\u003e\n\u003cp\u003eThe 89mm Race is for higher-power builds that are bumping into the factory MAF sensor's limit with the 76mm Street, or for cars being built around a bigger turbo and more power down the road. You can tune it properly on a lightly modified FK8, but it gives you more sensor range than that car needs. Around 400 wheel horsepower, have your tuner start watching MAF voltage. Let the datalog make the call, not the power number by itself.\u003c\/p\u003e\n\u003cp\u003eOn Hybrid Racings 433.5-wheel-horsepower demo FK8, the 76mm Street signal hit 4.96 volts and stopped climbing near the top of the pull. The 89mm Race kept that same sensor inside its measurement range. \u003cstrong\u003eThe 89mm Race inlet requires Hondata FlashPro or an equivalent solution that can apply the matching MAF calibration.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(178, 0, 0);\"\u003e\u003cstrong\u003eTECH SPECS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDyno proven power gains\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCold air feed\u003c\/li\u003e\n\u003cli\u003eEasily serviceable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(178, 0, 0);\"\u003eWHAT'S IN THE BOX\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eXLPE airbox and lid\u003c\/li\u003e\n\u003cli\u003eElliptical velocity stack matched to your chosen housing\u003c\/li\u003e\n\u003cli\u003eRed reusable oiled-cotton filter with a flat-top element\u003c\/li\u003e\n\u003cli\u003eYour choice of 76mm Street or 89mm Race MAF housing\u003c\/li\u003e\n\u003cli\u003eSilicone coupler that fits the factory turbo inlet pipe\u003c\/li\u003e\n\u003cli\u003eTwo lower outside-air inlet tubes\u003c\/li\u003e\n\u003cli\u003eReflective heat shields\u003c\/li\u003e\n\u003cli\u003eStainless clamps and mounting hardware\u003c\/li\u003e\n\u003cli\u003e2.5mm hex key and installation card\u003c\/li\u003e\n\u003cli\u003eOEM-style split loom for the factory MAF harness\u003c\/li\u003e\n\u003cli\u003eYour factory MAF sensor and wiring move to the new location without cutting a single wire. The split loom comes long and gets trimmed during install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(178, 0, 0);\"\u003e\u003cstrong\u003eCOMPATIBLE VEHICLES\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHonda Civic Type R | FK8 2.0T K20C1 | 2017+\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(178, 0, 0);\"\u003e\u003cstrong\u003eFITTING DETAILS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.\u003cstrong\u003e\u003cspan style=\"color: rgb(178, 0, 0);\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"HYBRID RACING","offers":[{"title":"76mm (Street MAF)","offer_id":58129685643647,"sku":"HYB-CAI-01-25","price":449.95,"currency_code":"GBP","in_stock":true},{"title":"89mm (Race MAF)","offer_id":58129685676415,"sku":"HYB-CAI-01-26","price":449.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0881\/0870\/files\/HybridRacingFormulaColdAirIntakeFK86.webp?v=1786092329","url":"https:\/\/www.dream-automotive.com\/pt\/products\/hybrid-racing-formula-cold-air-intake-honda-civic-type-r-fk8-2-0t-k20c1-2017-21","provider":"Dream Automotive","version":"1.0","type":"link"}