Smoothness changes drastically just by adding it to the engine oil you are using.

Newly developed engine oil additive ECL (non-Newtonian viscoelastic fluid)

 (1) Weisenberg effect : Sticking effect is obtained, wear reduction, seizure prevention, dustproof, The above effect is enhanced

2) Ballas effect : A movement perpendicular to gravity works. This enhances the compression ratio, power-up, cooling effect, cleaning effect, and more. 

(3) Toms effect : "Effect of reducing wear between fluids" is obtained and the effect of reducing power loss is enhanced. EffectThe engine runs quietly and smoothly. By reducing the friction inside the engine, vibration and heat generation are also reduced. It is recommended to add this product every time the engine oil is changed, which extends the life of these a result of repeating rigorous driving tests on racing cars and tuning cars, there is no effect on each cooling system and there is no damage to the engine. Experience next-generation technology.

TECH SPECS

• The engine will run quietly and smoothly

• By reducing the friction inside the engine, vibration and heat generation are also reduced

• Extends the life of engine oil.

• We recommend adding this product every time you change the engine oil

• Add 100ml to 5 ~ 6.5L of engine oil.

COMPATIBLE VEHICLES

• All Honda

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

Stock due Soon

Introducing a completely new gasoline fuel additive that has never been seen before !

Unlike fuel additives that are generally distributed, it is a product with high immediate effect that does not affect the fuel components.

Harmful unburned gas (CO, HC, Nox) generated from any engine is brought close to complete combustion in the combustion chamber.

As a result of repeating rigorous driving tests on racing cars and tuning cars, there is no effect on each cooling system and there is no damage to the engine.

In addition, carbon deposits are removed, and complete combustion of unburned gas improves not only power and torque, but also fuel efficiency.

Experience next-generation technology.

TECH SPECS

• 200ML per Bottle
• Add 200ml to 40-60ℓ of gasoline
• Be sure to shake well before use and then inject from the refueling port before refueling gasoline

COMPATIBLE VEHICLES

• All Honda

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

Stock due Soon

Introducing a new carbon extension for the FK8 front grille

The genuine extension is processed with real carbon by a special manufacturing method.

Since it is a genuine shape, the fitting can be installed as it is the genuine grill as it is.

Left and Right-hand side supplied

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. 

AVAILABILITY

3-6 WEEKS

May take longer, contact us for an estimated ETA

FK8 passenger side garnish has been added to the J'S RACING interior parts series!
It is a full-scale interior part with a genuine garnish (passenger seat side) finished with real carbon, with a focus on fit.

Produce a sporty feeling like a GT racing machine around the front dash!

You can easily install it without any discomfort because you only need to replace it with genuine parts.

TECH SPECS

• Carbon sheet heat-bonded to genuine panel

• Semi-matte specification ( Semigloss Finish)
  

• Color: Black & Red Carbon

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Please contact us for more information. 

AVAILABILITY

2-6 WEEKS

In order to be able to meet the Euro-6 emissions standard for the K20 turbo engines, HJS have developed a downpipe with sports cats.

The focus was on lowering the exhaust back pressure directly after the turbocharger as well as reducing the exhaust gas temperatures using a flow-optimised component.

Flow-optimised cast stainless steel is used for the inlet flange. The downpipe uses a 200 cell primary catalyst from a previous development for McLaren, which is supported by a short 300 cell secondary catalyst.

With this, HJS were able to significantly improve the exhaust gas flow while at the same time complying with the exhaust gas limit values. Comparative measurements on the Flowbench have shown that the mass flow has increased by around 27%.

TECH SPECS

• Euro-6 Emissions Standard
  
• 200cpsi Stainless Steel Primary Catalyst
  
• 300cpsi Stainless Steel Primary Catalyst
  
• 76mm Output Pipe Diameter
  
• Plug & Play
  
• Optimised Downpipe, proven on Flowbench
  
• Thermal Relief of the Turbocharger
  
• Sporty Sound

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. 

AVAILABILITY

6-7 weeks

In order to be able to meet the Euro-6 emissions standard for the K20 turbo engines, HJS have developed a downpipe with sports cats.

The focus was on lowering the exhaust back pressure directly after the turbocharger as well as reducing the exhaust gas temperatures using a flow-optimised component.

Flow-optimised cast stainless steel is used for the inlet flange. The downpipe uses a 200 cell primary catalyst from a previous development for McLaren, which is supported by a short 300 cell secondary catalyst.

With this, HJS were able to significantly improve the exhaust gas flow while at the same time complying with the exhaust gas limit values. Comparative measurements on the Flowbench have shown that the mass flow has increased by around 27%

TECH SPECS

• Euro-6 Emissions Standard
  
• 200cpsi Stainless Steel Primary Catalyst
  
• 300cpsi Stainless Steel Primary Catalyst
  
• 76mm Output Pipe Diameter
  
• Plug & Play
  
• Optimised Downpipe, proven on Flowbench
  
• Thermal Relief of the Turbocharger
  
• Sporty Sound

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. 

AVAILABILITY

6-7 weeks